Forum quick links
Alternative Standard to ASHRAE 90.1-2007 Appendix G
NC-2009 EAp2:Minimum energy performanceposted by Jourdan Younis on
We have a project that consists of two connected buildings: an admin building and a factory building.
Interview Room with 2 seats
NC-2009 IEQc6.2:Controllability of systems - thermal comfortposted by Maher Hemod on
what dose consider an interview room with 2 seats in a hospital project, is it individual occupant space or shared multi occupant ? Thanks in advance.
Private bus line for public use?
NC-2009 SSc4.1:Alternative transportation - public transportation accessposted by Michael Wahjudi on
Hi all, I have received reply from LEED reviewer stating that "campus or private bus line that falls within onequarter mile of the project site must provide transportation service to the public in
indoor irrigation
NC-v4 WEc1:Outdoor water use reductionposted by Francesco Passerini on
Is indoor irrigation not considered in this credit? If it isn't, could I consider it in the section "Innovation", since, in the project I'm considering, collected rainwater is used?
Hydrogen Production
NC-2009 EAc2:On-site renewable energyposted by Kristopher Lashley on
Hi, We are looking to install an on-site hydrogen production station that will produce hydrogen that is then sent to hydrogen charging stations around the project to refuel and run a fleet of hdrog
Walking distance from the barracks
NC-2009 SSc4.1:Alternative transportation - public transportation accessposted by Jose Dehitta on
Our project is a cafeteria which is inside the military base. All the soldiers walks from their barracks to eat or pick up food at the cafeteria. Can we use Option #2 to get 6 points?
How to count Individual Worksations
NC-2009 IEQc6.1:Controllability of systems - lightingposted by SAMY Chamy on
Dears:- we have open office with 20 Desk.in every desk three occupants are working.That three occupants do the same operations in 15 desks in remaining desks they do different activities How can
LEED V4 - TENANT SPACE ENERGY MODELING
CI-2009 EAp2:Minimum energy performanceposted by Paula Hernandez on
Hi, Regarding the Energy Performance Calgulator that should be used instead of Table 1.4, my questions are: 1.
Use of renewable energy in calculation
ND-v4 GIBc2:Optimize building energy performanceposted by Martine Desbois on
I just would like to confirm that we can use the renewable energy used in our buildings as part of the calculation for energy saving as is done in LEED NC. Is this correct?
Whole building Energy and Water Usage Data
NC-2009 MPR6:Must commit to sharing whole-building energy and water usage dataposted by Terry Squyres on
I was wondering if somebody could help walk me through this aspect of PIf1. My project is a University building in which we will have limited monitoring.