Forum quick links
Definition of "Sourced"?
NC-v4 MRc2:Building product disclosure and optimization - environmental product declarationsposted by Douglas Flandro on
The credit language says,"For credit achievement calculation, products sourced (extracted, manufactured, purchased) within 100 miles (160 km) of the project site are valued at 200% of their base co
EAP2 Minimum Energy Performance -- How to classify building
EBOM-2009 EAp2:Minimum Energy Efficiency Performanceposted by cathy keagle on
We have a client that would like to attempt to certify one building that is part of a college campus. This building is primarily instructional classrooms, some office space, and an auditorium.
Single certificate or multiple certificates?
NC-v4 MPR2:Must use reasonable LEED boundariesposted by Ricardo Sá on
I am currently involved in the rehabilitation project of a set of school buildings located on the same grounds.
Updating credential in LEED Online
CI-2009 IDc2:LEED Accredited Professionalposted by Michael Smithing on
We renewed our credentials this year but the certificate link in LEED Online did not update automatically. After using the SC box for a few projects, I asked how to deal with this problem.
Loss of points after certification and ramification
NC-2009 SSc4.3:Alternative Transportation—Low-Emitting and Fuel-Efficient Vehiclesposted by howard finkel on
One of our recently completed projects obtained Lead Silver and part of the points were based on NC-2009 SSc4.3: and SSC4.4.
Freatics water
NC-2009 WEp1:Water Use Reduction—20% Reductionposted by VICTOR MORENO on
Hello. In our LEED Project, the water used for Urinals and WC is recovered of the subsoil (freatics water).
Walk in Freezer Auto Light Shut off
NC-2009 EAp2:Minimum Energy Performanceposted by John Covello on
Hello Everyone, Our resort project has 25 walk in freezers for food storage.
Powered Equiptment Compliance
EBOM-2009 SSc2:Building Exterior and Hardscape Management Planposted by Nelina Loiselle on
It is unclear to me what exactly qualifies a piece of equipment as a environmentally preferable. Does it have to meet all the BMPs listed in the chart above?
Baseline 4 Orientations or Not
NC-2009 EAp2:Minimum Energy Performanceposted by Alice chen on
Hi All, I am working on a LEED NC 2009 Project. I just wonder if I need to use the average results for 4 orientations for baseline model. Is it acceptable to only run 0 degree baseline model?
CAV and BAS monitor
CS-v4 EQp1:Minimum indoor air quality performanceposted by Takayuki Hirota on
For CAV, a current transducer on the supply fan, an airflow switch, or similar monitoring device must be installed. If a BAS can monitor airflow fan modes (strong/weak etc.), is that sufficient to