Forum quick links
Single Zone Ventilation Calculation
NC-2009 IEQp1:Minimum IAQ Performanceposted by Boggarm Setty on
We have a project which has an big roof top lounge served by RTU, the same unit serve adjacent corridor & storages so this is basically an single zone system with no VAV terminal boxes, so whil
Ventilation calculation square footage boundary
NC-2009 IEQp1:Minimum IAQ Performanceposted by Melissa Mikulka on
We have a project that contains a recycle bin storage area within a corridor. Do the exhaust calculations have to include the entire corridor space or can we designate an area around the
ERV and multiple fan coil units
NC-2009 IEQp1:Minimum IAQ Performanceposted by Courtney Royal on
Hello, I've only completed the ventilation spreadsheet a few times and have a few questions. Thanks!
Fresh air provision - Garment factory building
NC-2009 IEQp1:Minimum IAQ Performanceposted by Aravindraj RB on
Our project is a garment factory building (G+5), having majority floor area as production unit which is mechanically ventilated.
Dwelling Unit Ventilation
NC-2009 IEQp1:Minimum IAQ Performanceposted by Boggarm Setty on
Hi, we are working on a residential building and filling out "Minimum IAQ performance" ventilation calculator.
IEQp1
NC-2009 IEQp1:Minimum IAQ Performanceposted by Adi Negara, LEED AP BD+C on
Hello, Our project is to build a two-story office building in Indonesia.
Fuel tank room exhaust
NC-2009 IEQp1:Minimum IAQ Performanceposted by Manuel Martin Delgado on
Hello,
The correct/latest 62MZ & LEED min. IAQ spreadsheet?
NC-2009 IEQp1:Minimum IAQ Performanceposted by Aru Sau on
Is "v2009v4_Minimum IAQ Performance Calculator_v03" spreadsheet is the correct/right one for a project registered in February 2016 in LEED 2009? Also, Is there any updated "62MZCalc.xls" (Revised A
Ventilation requirements for a freeze box and cold box
NC-2009 IEQp1:Minimum IAQ Performanceposted by Frantisek Macholda on
Hello everybody,
Question regarding minimum filter requirements
NC-2009 IEQp1:Minimum IAQ Performanceposted by Henry Delgado on
The questions is in regards to the LEED Reference guide for green building design and construction, 2009 Edition, IEQ Prerequisite 1 - Minimum indoor air quality performance (pg 407), Case 1 - Mech