Greetings, There is an issue on applying F factor about which I'd appreciate some assistance. The F factor in general refers to the floor slab edge insulation.

Hello, On our project we are getting supplied from local contractors materials like sandstone, granite, reused teak wood, and limestone.

We are modeling a new building in a previously developed site, with some remains of the previous building. One of the project strategies is to step aside the building façade (2 m, approx) and maint

Is Table 10.8 mandatory for plug fans of new buildings? The fans are installed in Air Handling Units. If they are mandatory, are they mandatory both for supply fans and for return fans?

Shall the person who enters his/her initials under signatory section ( for example EAp2-1, 2-2, 2-3 ) be registered mechanical engineer (PE) ?

Greetings, There is a clarification issue while entering these values in the Baseline about which I'd appreciate some advice. The OA flow should be identical in both models.

The project is a medium sized workshop shed and will be mechanically ventilated with fans with a particular air change per hour as per the local standards.

I am working on a project (2 story office building) as a LEED AP & architect and received Preliminary Design Package comments from GBCI.

Our project consists of renovation of 140,000 SF of an existing building, as well as the addition of 30,000 SF of new space.

The overall process load of our project turns out to be in the vicinity of 15% only. We are aware that 15% is absurdly low and unusual for plants.