Is there a different Table 1: ASHRAE 90.1-2013 Appendix G percentage Improvement that we can use for those projects under LEED v4 but using ASHRAE 90.1-2013?

If so, please forward.

Hi,

Is it necessary to have a Leed Green Associate or a Leed AP ND to propose one project to the certification LEED ND (plan or built) ?

Thanks for your help.

Regards.

I'm funneling this question on behalf my mechanical engineer:

Our total breakdown of energy use is as follows:

Under "Onsite separation vs.

Page 479 in the RG states that you need to identify 'at least five materials...targeted for diversion.' On page 481 in Step 3, the 5th step says that you need to 'specify the means and methods of d

There are two separate columns in New Construction and Demolition Waste Management Calculator in .xls format: ‘Material Description’ and ‘Material Type’.

My project has 30% of carparking reserved for electric vehicles. The plugs used comply with an IEC standard but not the one specfied in the credit requirements.

Do you know where information can be found to determine the daimeter of trees after 10 years of planting? Our landscaping architect have only the information in maturity.

The train station is just about 1mile from the projectHello I have a project in California with multiple shuttles that run short routes in the area of this NC building.

Beginning to document the EDP's and such for this credit and in the resources tab under the credit I found the BPDO Calculator, which is an excel spreadsheet tool to help document and organize your