See LEEDuser’s guidance on v4 »
Post a question or comment
Credit Filters
Filter by location
Forum
Topic
Replies
Recent

Automatic Daylight dependent Lighting controls and motion detectors

NC-v4 EQc6:Interior lighting
posted by  Benjamin Weise  on 

Hello,

1
Fri Feb 14, 2020, 4:51 pm

Minimum IAQ performance LEED CI v4

CI-v4 EQp1:Minimum indoor air quality performance
posted by  Donna Juselis  on 

Credit states "Monitoring Mechanically ventilated spaces For mechanically ventilated spaces (and for mixed-mode systems when the mechanical ventilation is activated), monitor outdoor air intake fl

2
Profile picture for user eb.projectmanagement_1
Eric Bautista
Head of Energy & Environmental Management
EB Project Management | Green Building Consultants
LEEDuser Basic Member
14 thumbs up
Tue Feb 11, 2020, 8:40 am
Default Avatar

Pre-consumer/post consumer Aluminum Recycled Content

NC-v4 MRc3:Building product disclosure and optimization - sourcing of raw materials
posted by  Trey Jones  on 

If the manufacturing process I am involved with consumes aluminum coil to produce our end product can we use the internal scrap percentage of the aluminum reused/reverted at the mill as either pre

4
Mon Feb 10, 2020, 10:03 pm
Default Avatar

SSc4 - Special Site Strategies beyond LEED v4 criteria (Rainwater Management + Industrial waste-water considerations)

NC-v4 SSc4:Rainwater management
posted by  Olawale Taiwo  on 

PROJECTS THAT ARE PART OF A MULTI-TENANT COMPLEX ONLY
The credit requirements may be met using a coordinated approach affecting the defined project site that is within the

0

Outdoor Air Monitoring

NC-v4 EQp1:Minimum indoor air quality performance
posted by  Dave Hubka  on 

Hello,

2
Mon Feb 10, 2020, 7:33 pm
Default Avatar

Natural ventilation

Warehouses-NC-v4 EAp2:Minimum energy performance
posted by  Piotr Adamczyk  on 

Dear Everyone,

1
Tue Feb 11, 2020, 4:27 pm
Default Avatar

Baseline for Manufacturing facility energy usage...

NC-v4 EAc2:Optimize energy performance
posted by  Rick Alfandre  on 

We are dealing with a manufacturing facility that has energy intensive process loads.   Is there a standard way to establish a base case for manufacturing process loads?   

1
Fri Feb 14, 2020, 5:23 pm
Default Avatar

International RPC available on USGBC site but ineligible when submitting credits

NC-v4 RPc1:Regional priority
posted by  Tobi Langman  on 

Hello everyone,

2
Profile picture for user tristanroberts
Tristan Roberts
Founder & Community Director
Metricorps
LEEDuser Expert
7781 thumbs up
Mon Feb 10, 2020, 3:30 am
Default Avatar

pursuing Renewable Energy and Green Power with the v4.1 credit substitution path

NC-v4 EAc5:Renewable energy production
posted by  Cindy Quinn  on 

I am working on a v4 project that is about to submit for final construction review.  We must reach Gold and are right on the threshold, going in with 62 points, if all are earned.  We don

1
Fri Feb 7, 2020, 7:02 pm
Default Avatar

Inherently Non-Emitting vs. Zero VOCs

NC-v4 EQc2:Low emitting materials
posted by  Michelle Rosenberger  on 

We have done 8 previous LEED 2009 Gold projects that were pursuing Redlist constraints on top of LEED.

5
Default Avatar
Kerry Honsinger
Reynolds Ash and Associates
LEEDuser Basic Member
5 thumbs up
Fri Feb 7, 2020, 4:34 pm