Forum quick links
baseline system selection for building with very different internal gains in different zones.
NC-v4 EAp2:Minimum energy performanceposted by Moses Chong on
Hi!
Plug loads Process Loads savings vs baseline
CI-v4 EAc2:Optimize energy performanceposted by Xavier Valladares on
Hi All,
Is it possible and if so, how would you justify savings in plug and process loads for an interior fit out energy model vs baseline? Can you claim a percentage reduction if
Regd. heating system to be selected in baseline energy model as per ASHRAE 90.1 2013
NC-v4 EAp2:Minimum energy performanceposted by Anurag Ghosh on
Hi, we have a hospital project in India following ASHRAE 90.1 2013 and having cooling as the predominant system.
Service Water Heating with Solar Collectors
NC-v4 EAp2:Minimum energy performanceposted by Junaid Mujahid on
Hi Everyone,
Issues in meeting the credit requirements of Advanced Energy Metering
NC-v4 EAc3:Advanced energy meteringposted by Alokmay Behera on
Greetings.
Modeling Multifamily Residential Building
NC-v4 EAp2:Minimum energy performanceposted by Vassil Vassilev on
Greetings,
We are in a process of developing an energy model for a multifamily residential building.
Long and short term bike parking for TI project
CI-v4 LTc4:Bicycle facilitiesposted by Lisa Adams on
For a CI tentant improvement project, the LEED Rating System Variation language states a minium of two short term and two long term bike parking spaces are required.
Skylight >5% of roof area
NC-v4 EAp2:Minimum energy performanceposted by Junaid Mujahid on
If the skylight area is greater than 5% of the roof area, what is the U-Value to be considered for the baseline model?
Baseline Outdoor Air Requirement for Kitchen Exhaust & Supply
NC-v4 EAp2:Minimum energy performanceposted by Junaid Mujahid on
Hi Everyone,
Regd. glazing U value to be considered as per ASHRAE 90.1 2010
NC-v4 EAp2:Minimum energy performanceposted by Anurag Ghosh on
Hi All,