Forum quick links
Newbie Looking for guidance on completing the Minimum Energy Performance Calculator
NC-v4 EAp2:Minimum energy performanceposted by Nelson Cepeda on
Q: Where do I find the Equivalent Full Load Hours of Operations Per Year values to put in the corresponding cells, such as for Interior Light, Service Water Heating, etc...to place on the Schedules
ASHRAE 90.1-2010 VS. MLO lighting zone
NC-v4 EAp2:Minimum energy performanceposted by Nuttanee Vongveeranonchai on
I am working on a project locating on a commercial corridor of a capital city.
Separate buildings with common basement
NC-v4 EAp2:Minimum energy performanceposted by Nikos Tsitsikas on
Hi all,
Exterior Building Lighting façade - MANDATORY PROVISIONS ASHRAE 90.1 - 2010
NC-v4 EAp2:Minimum energy performanceposted by Sara BENLOUBA on
We are currently developing a large-scale lighting project for which we need to clear up some doubts about ASHRAE 90.1 regulations – section 9.4 – 2010 regarding exterior facade lighting.
Passive House Certification
NC-v4 EAp2:Minimum energy performanceposted by Matthew Kaplan on
We have a school project that is considering both PHIUS certification and LEED certification.
7.6.1.2 Extracting Fan Power – Baseline Design
NC-v4 EAp2:Minimum energy performanceposted by Amal Venugopal on
Hi Sir,
Greetings!...
Simulation Model upload
NC-v4 EAp2:Minimum energy performanceposted by R.L. Bowen on
Hi! We recently uploaded a project for review. Unfortunately we missed uploading the actual energy model.
Reporting of proposed fan brake horsepower.
NC-v4 EAp2:Minimum energy performanceposted by Michael Callan on
I have a question. As I understand it, if the operating fan/pump BHP is available I should be reporting it on the Air-Side HVAC tab, in lieu of the nominal (overestimated) HP as it makes
Campus project
NC-v4 EAp2:Minimum energy performanceposted by Nikos Tsitsikas on
Hi all,
We are working on a campus project which consists of two separate buildings which, however, do share a common underground floor.