Does anyone have idea if we could model the benefit of using green wall (Vegetated)?

I am running a high-rise commercial development for LEED-CS. According to Table G3.1.1B, the baseline system shall be chilled water.

Hello all, Two little questions: 1) If I had automatic internal draps, would I be obliged to simulate them in the baseline/proposed building? 2) Is it possible to consider, as for the lighting sys

Hello!! I have a question regarding energy modeling for my project located in Northeast Mexico. It is a shopping mall in which all the middle hallways and circulation areas are going to be outdoor,

Hello, How are the Thermostat values (Upper and Lower limit) to be selected for LEED CS please?

Greetings Everyone I'm working on a office project with outdoor spaces within the LEED Boundary. The project's construction phase is almost finished.

Hi, I know this has been discused before, but I still can´t make it. The thing is that I have a C&S building to model. I have assumed 35 W/m2 of other loads on all tennant spaces, which the sim

Hi all! I’m modeling a 49-story building with 7 basements, and it has over 40 % (about 85 %) of its envelope covered with glazing, so I have a doubt about the calculation on the Window to Wall Ra

Hi everyone! If the project base building scope does not include the lighting fixtures for tenant spaces but wiring stub-outs are, do we still need to have the automatic control device for the "bu

Hi all We work on a office project at Marseille France with the Leed CS 2009 ; According to - Table B-3 International Climate Zones Ashrae 90.1 2007 : Marseille / France is located in zone 4 - § B