Our project finished SEED evaluator parts 1 and 2, the only mail we received from them is a blank mail indicating that the project is approved to move forward to part 3. Is this email enough as...

I'm using the Outdoor water use reduction calculator_v02 from the resources tab since the project its outside USA. I'm entering the data for the monthly rainfal and Monthñy ETo from the IWMI site...

We are trying to achieve the GIB - Solid Waste Management.

The project will have recycling stations, a drop-off point for hazardous waste, and recycling containers every 245m. ...

Hi, 

We have implemented additional strategies at our office with regards to the bird collision detterrence monitoring program but we have registered a couple of bird strikes. I would like...

Hello our project is 3 office  floors with some spaces destined only for phonebooths wich are only designed for 1 person, however because of the small area the calculations to obtain occupant...

Our project is a 24 level office building. At least 75% of occupancy has been reached.

According to LEED Compliance Guide, for EQ Prerequisite Minimum Indoor Air Quality Performance, for...

Hello everyone, We are working on a project attempting option 2: Perimeter measurements. 

How should exterior lighting in terraces from retail should be addressed? specifically in this...

  Hi!

Is there a different alternative to providing individual thermal comfort controls for each workstation in open areas? assuming that the HVAC design is divided by thermal zones, so it...

Hi,

I would like to know if the definition of "work surfaces" includes only the surfaces of the workstations, or if it also includes any other surface such as: cassuals...

Hello everyone.

I'm a bit confused with the Percent of Occupants calculation on the Water Use Reduction Calculator.

We only have one model of toilets and dry urinals.
I...