Log in
Forum
Topic

when is the weather envelope established?

NC-2009 IEQc4.2: Low-emitting materials - paints and coatings
posted by James Weiner on Jan 15, 2010, 4:21 pm

A contractor is choosing to seal glulam beams in place (during framing and prior to sheathing a new construction project) with a product slightly exceeding LEED...

Last reply: Mara Baum, Jan 21, 2010, 1:48 pm

Window in the interiors

NC-2009 IEQc8.1: Daylight and views - daylight
posted by Susan Robertson on Jan 20, 2010, 1:14 pm

If I have a window wall that receives light through another room that has a window wall and is recieveing light from the exteriors. So can this interior window wall be included in the...

Last reply: Carlie Bullock-Jones, Jan 21, 2010, 8:54 am

Different Tvis in one plane of glass

NC-2009 IEQc8.1: Daylight and views - daylight
posted by Jennifer Preston on Jan 20, 2010, 12:16 pm

If I have two different glass types with different...

Last reply: Carlie Bullock-Jones, Jan 21, 2010, 8:14 am

Motel-style dormitory with smoking rooms

NC-2009 IEQp2: Environmental Tobacco Smoke (ETS) Control
posted by Kimberly Frith on Jan 20, 2010, 3:21 pm

How does this prerequisite apply to a dormitory that has exterior motel-style walkways (no indoor conditioned corridors between rooms) where the residents are allowed to smoke in the individual...

Last reply: Tristan Roberts, Jan 20, 2010, 8:37 pm

Flush monitoring requirements

CI-2009 IEQc3.2: Construction IAQ management plan - before occupancy
posted by Mary Davidge on Jan 20, 2010, 10:50 am

We have a project with two types of spaces, one is a naturally ventilated warehouse and the other is office with package units. At a local ashrae meeting the speaker stated that to achieve the...

Last reply: Tristan Roberts, Jan 20, 2010, 8:02 pm

Using option (3) measuring lighting (%) percent

EBOM-2009 SSc8: Light Pollution Reduction
posted by Reynaldo Castro on Jan 19, 2010, 5:25 pm

Using Option (3) it states under the LEED -...

When does the Performance Period Start?

EBOM-2009 SSc1: LEED Certified Design and Construction
posted by Mark Westover on Jan 18, 2010, 12:42 am

I am sorry about asking the question here, but I could not find anywhere else to ask it.
I am trying to figure out when the performance period starts. The definition in the "Introduction-...

Last reply: Dan Ackerstein, Jan 19, 2010, 1:28 pm

2003 or 2008 CGP (Construction General Permit)?

NC-2009 SSp1: Construction Activity Pollution Prevention
posted by Claudia Rieger on Jan 15, 2010, 8:39 am

Hi everybody,
I´d like to understand if the...

Last reply: Tristan Roberts, Jan 15, 2010, 8:41 am

Map of FSC Distributors

NC-2009 MRc7: Certified Wood
posted by Devon Bertram on Jan 13, 2010, 11:04 am

Dwell has developed a map-in-progress of distributors that are certified by the Forest Stewardship Council: http://www.dwell.com/maps/...

CI 2009 ID C2.0-LEED Accredited Professional

CI-2009 IEQc8.1: Daylight and views - daylight
posted by JP Rout on Jan 13, 2010, 8:17 am

Hi,
I am a LEED AP and have enrolled in Prescriptive CMP for specialty for BD+C. I am now working for a project, which will be registered under USGBC for Commercial Interiors(LEED 2009 for...

Last reply: Tristan Roberts, Jan 13, 2010, 9:20 am