Greetings.I am working on a project for a previously certified LEED community college campus (circa 2010). Our project consists of three buildings one of which is an existing...

The 2024 update to LEED v4 splits the points into energy cost (site/source) and...

Good day

I am working on projects in Estonia and we are trying to achieve the requirement for Opt 2 of this credit by choosing 5 materials from 3 different manufacturers.

During my...

Good afternoon everyone,

We are working on a LEED BD+C NC certification project in Brazil and have identified adhesives and...

I have a project attempting EAp2/c2 via the prescriptive pathway, Option 2, 50% AEDG.  The only "required documentation" listed in the Reference Guide is the completed AEDG tables, which seems...

I have a question from our Electrical Engineer that I am unsure on. 

Our building has several small service buildings at the rear of the property. We understand that we need to include...

Hi All,

Is it possible and if so, how would you justify savings in plug and process loads for an interior fit out energy model vs baseline? Can you claim a percentage reduction if

...

Hello,
Under EAc1 my understanding is that the energy model will use a baseline assumption for plug loads. Would it be possible to introduce a plug load energy reduction program as an ID...

insight and comments. I very much appreciate this forum as a place where we can ask the questions concerning our project, even when the questions aren't popular ones. Like most projects this one has...

Let me confirm the following ASHRAE 62.1-2007 Zone Air Distribution Effectiveness (Ez) issue.

Our project utilizes total heat exchangers for ventilation. We wonder what Ez should we use...