Is there an ID credit or other credit that can be acheived by providing bottle filling stations in the project? It seems that we could prove the savings of recycling or waste vs....

Hi Christopher,
The rules say that you're NOT allowed to use the LEED 2009 guidelines for which materials to include/exclude in an NC 2.2 project. To be safe you should just include the MF...

You might try posting your question at the forum topic for LEED-ND projects:
http://www.leeduser.com/...

Marcus,
I am looking at the on-line form for EAc2 On-Site Renewable Energy. (LEED 2009 for New Construction) The asterisk occurs after each of two Required Signatory boxes. Path selected...

Tristan Roberts Representative Vermont House of Representatives LEEDuser Expert 11477 thumbs up November 29, 2011- 10:30 am Ruffina, this credit covers things that are applied on site—usually wet-applied. So gaskets would not be covered, and usually glazing is made off-site. Sealants are covered under IEQc4.1, so please post your questions about those under that forum. Log in or register to post comments ...

The reference guide states that CS projects requiring both fundamental and enhanced...

Hello,
I've got a doubt about the time that we should develop the breakdown of energy.
The guide says: "This analysis of major energy-use categories must have been conducted within 2...

We have a retail banking project. the building is 2 stories high + a roof top and was renovated. We installed a roof garden on it. we also install light fixture surrounding the roof garden....

I have a situation where I cannot eliminate a sloped acoustic ceiling with a gyp ceiling, and the walls do not go up to the deck (they go to the underside of trusses). To enclose the room, I...

I have a steel fabricator applying a primer (grey) to the bar joists and steel for my project at thier facility. Do they still need to comply with the...