Topic | Recent |
---|---|
Continuous insulation on the inside of the wall?NC-2009 EAp2: Minimum Energy Performanceposted by David Sheridan on Apr 24, 2012, 10:45 am
Our state energy code is based on ASHRAE 90.1-2004, which I believe does not require ci for exterior walls. ASHRAE 90.1-2007 requires R-3.8 ci for nonresidential walls. The project architect... Last reply: Marcus Sheffer, Apr 24, 2012, 2:07 pm |
|
Hand soapEBOM-2009 IEQc3.3: Green cleaning - purchase of sustainable cleaning products and materialsposted by Mélanie Pitre on Apr 24, 2012, 1:45 pm
We are wondering if Benzyl Alcohol and Benzyl Benzoate are considered as antimicrobial agents? The main hand soap used on our project contains both. Thanks! Last reply: Megan Meiklejohn, Apr 24, 2012, 2:01 pm |
|
Reused aggregate base on siteNC-2009 MRc4: Recycled Contentposted by jim bell on Apr 24, 2012, 9:11 am
Our project in Guam used base material extracted on site and gradated for... Last reply: Jennifer Frey, Apr 24, 2012, 1:53 pm |
|
Baseline service water heaterNC-2009 EAp2: Minimum Energy Performanceposted by Mark Benson on Apr 24, 2012, 10:41 am
In the proposed design, we are using a water-to-water heat pump for the sole purpose of service water heating. Voltage and Amps are 460v and 140 RLA, respectively. It is coupled with an unfired... Last reply: Marcus Sheffer, Apr 24, 2012, 11:22 am |
|
Tenant Space VentilationCS-2009 IEQp1: Minimum indoor air quality performanceposted by Luis Miguel Diazgranados on Apr 24, 2012, 11:17 am
Hi everybody; I'm working in a CS office building with a designed ceiling plenum natural ventilation system for tenant spaces. The owner of the project will be providing the louvered... |
|
Interior flat on celingCS-2009 IEQc4.2: Low-emitting materials - paints and coatingsposted by Gabriela Hernández Castillo on Apr 17, 2012, 1:41 pm
Per addenda number 100000419, interior flat coatings voc allowance has drop down to 50 gr/lt, but what about interior aplications on ceiling? Is it still allowable to have 250 gr/l on flat... Last reply: Gabriela Hernández Castillo, Apr 24, 2012, 10:38 am |
|
C&S Default Occupancy- Unoccupied zonesCS-2009 EAp2: Minimum Energy Performanceposted by Maya Karkour on Apr 24, 2012, 10:32 am
Dear all, We're working on a large C&S retail mall. We got the following preliminary design review comment for the PIf-3: "It does not appear that all spaces have been included... |
|
ASHRAE 90.1-2007 Minimum Bldg Envelope RequirementsNC-2009 EAp2: Minimum Energy Performanceposted by P Fanfulik on Mar 28, 2012, 2:37 pmin or register to post comments Marcus Sheffer LEED Fellow 7group / Energy Opportunities LEEDuser Expert 5903 thumbs up March 29, 2012- 3:01 pm NC since this the forum for EAp2 that it was posted under. In general... Last reply: Marcus Sheffer, Apr 24, 2012, 10:26 am |
|
Energy efficiency exemption for fire pumpsNC-2009 EAp2: Minimum Energy Performanceposted by Ricardo Sobral on Feb 17, 2012, 6:22 pm
Does anybody know if electric fire pumps are exempted from energy efficiency requirements? Last reply: Marcus Sheffer, Apr 23, 2012, 5:06 pm |
|
Bio-based building materials- foam for use under concreteNC-2009 MRc6: Rapidly Renewable Materialsposted by Charles Fritzemeier on Apr 13, 2012, 3:39 pm
I have a project for which we are pursuing Platinum and have an opportunity to use a... Last reply: Tristan Roberts, Apr 23, 2012, 2:43 pm |