Log in
Forum
Topic

Assembly Recycled Content

CS-2009 MRc4: Recycled Content
posted by Angela Saggin on Apr 19, 2012, 4:30 pm

Hi!

I was reading about the...

Last reply: Emily Catacchio, Apr 26, 2012, 1:59 pm

Leveling Compounds

NC-2009 IEQc4.1: Low-emitting materials - adhesives and sealants
posted by Bruce Maine on Apr 5, 2012, 11:07 am

Has anyone experienced reviewers comments on Leveling Compounds or is the application more geared towards flooring systems? Most compounds are zero...

Last reply: Abena Darden, Apr 26, 2012, 1:45 pm

Qualifies for SSc7.1 and SSc7.2--Double Dipping?

NC-2009 SSc7.2: Heat island effect - roof
posted by Brooks Critchfield on Apr 26, 2012, 11:05 am

The grade at our project drops considerably, allowing for conditioned space below a green roof and paved areas. Would it be considered double dipping if these areas are part of both the filings...

Last reply: Brooks Critchfield, Apr 26, 2012, 1:19 pm

LEED online access and compatability

leedonline.com access - is it possible???
posted by Sherri von Wolfe on Apr 26, 2012, 1:12 pm

Hello,
We are currently working on two LEED projects utilizing the Safari platform. Recently, I had trouble with uploads on NC 2009 SSc5.2 (v03). They would upload, but then the credit...

flashing and trim

NC-2009 SSc7.2: Heat island effect - roof
posted by Iris Amdur on Apr 24, 2012, 8:16 am

Are roof flashing and trim included in SSc7.2 calculations?

Last reply: Tristan Roberts, Apr 26, 2012, 12:26 pm

Design Application Decision- 1 Denied Credit

LEED Reviews: Appeals, Design/Construction Submittals, and more
posted by Joseph Greene on Apr 26, 2012, 11:11 am

We received our design application decision and 1 credit was denied. We noticed this was due to a simple documentation error which can be easily corrected. What is the protocol for having this...

Last reply: Scott Bowman, Apr 26, 2012, 11:24 am

Performance period before project registration?

EBOM-2009 MRc9: Solid waste management - facility alterations and additions
posted by Jorng-ren Chern on Apr 26, 2012, 4:15 am

My client is an electronic product manufacturer and their corporation headquarter is planning to pursuit LEED...

Last reply: Barry Giles, Apr 26, 2012, 10:14 am

Exhaust air energy recovery in the baseline

CS-2009 EAp2: Minimum Energy Performance
posted by FABIO VIERO on Apr 20, 2012, 3:55 am

Hello all,
my question is: when do i have to consider the exhaust air energy recovery in the baseline building’s...

Last reply: Marcus Sheffer, Apr 26, 2012, 9:33 am

Using DCV to reduce energy use and meet IEQp1

EBOM-2009 IEQp1: Minimum indoor air quality performance
posted by Peter Dahl on Jun 17, 2010, 11:40 am

Tristan Roberts Representative Vermont House of Representatives LEEDuser Expert 11477 thumbs up June 20, 2010- 11:34 pm Ralph, feel free to use this forum to share "Project CIRs"! (And encourage others.) If it starts to become popular we might be able to set something up.I am looking for USGBC to soon announce a key change to its CIR process, FYI. Log in or register to post comments Roger Chang Principal, Energy and Engineering Leader DLR Group | Westlake Reed Leskosky LEEDuser Expert 398 thumbs up June 22, 2010- 11:09 am It isn't completely clear what you're trying to achieve....

Last reply: AshLee Eustace, Apr 26, 2012, 9:19 am

Simulation Clarification

NC-2009 IEQc8.1: Daylight and views - daylight
posted by Rebekah Burke on Apr 18, 2012, 4:27 pm

a comment from a technical representative of the USGBC (not a reviewer, just an answer to a question) I received earlier in this forum if you're interested. Log in or register to post comments Tiffany...

Last reply: TODD REED, Apr 26, 2012, 8:23 am