When reusing an existing building (major renovation) then only new flooring materials would be applicable for the credit?

How should we model the air curtain at the building entrance? Should we model as process load for both baseline and proposed?

What is the documented proof required to be submitted to USGBC confirming on the Occupancy considered for our project.

How should I select the column "Space Usage Type" for each space. My criteria is to assign the type of space which each particular room serves.

This may be a very simple question, and perhaps our team is looking into this too deeply: We have a campus which we intend to use a Master Site with individual registrations (i.e. not a group).

We are working in a project that has a gas-fired boiler that supplies hot water for space heating (radiant floor) and domestic hot water. Do we need to comply with efficiencies in tables 6.8.1F an

If part of the building area passes at 9am but does not pass at 3pm does that mean we cant use that 9am area for that time.

Dear LEED, We are designing a medical office with VRF system, to fulfill iaq requirements we add independent outdoor air unit comprises of supply and exhaust fans on each zone.

Hi all Can u suggest the Ventilation rates for the Production / manufacturing areas for a Pharmaceutical clients because ASHRAE doesn't mention any for the Production in the Table 6-1

Hello, I am documenting this credit using the simulation method. For many of the regularly occupied spaces, the rooms are above the 10fc requirement except for a small corner of the room.