First of all, I’m sorry for posting a question of the v2.0 Guide in the 2009 page, but there is no space for CS v2.0 projects anymore.

I am working on a Core&Shell v2.0 project where...

Our client is building a Retail center for a large grocer with small satellite retail spaces. The balance of the building is simply a parking garage with an enclosed and tempered elevator lobby....

Hi There,

I've got two projects, one is a shopping mall and the other a health clinic, but I can't figure out the uses for the respective transients. I've addopted for the shopping...

Our project has underground water with potable quality. Will the use of this water be considered an option for reducing the potable water consumption that is supplied by municipal sources?

Has anyone experience with the documentation of adjustable flowrates?
Some fixtures like faucets and showerheads can be adjusted to a lower flowrate, however the spec sheet only shows a...

Every toilet stall in the project includes a handheld bidet faucet (or spray) and a lavatory. Are these calculated as lavatory faucets or ignored in the water use calculation?

Hi,

We are working on a luxurious Core & Shell Residential Building. The future tenants will decide on the water fixtures for their own flats/apartments. However, there will also be...

The LEED Online sample form for water use reduction shows 21% reduction of water use in all fixtures. However, at the end of the form it indicates "N".
What is the reason for that?

How to earn Water Use Reduction Points, when the local code requires e.g. minimum flow for Commercial lavatory faucets=1.6 gpm and over the baseline for other fixtures, too.

I´m working on the template and I want to know if in the baseline case I input the conventional public lavatory faucet of 0.5 gpm can I input for the desing case 0.25 gpc of the metering faucets...