Topic | Recent |
---|---|
Process load significantly lower than 25%NC-2009 EAp2: Minimum Energy Performanceposted by Panupant Phapant on Dec 18, 2014, 2:20 am
The overall process load of our project turns out to be in the vicinity of 15% only. We are aware that 15% is absurdly low and unusual for plants. The factory owner, nevertheless, sent us a full... Last reply: Jean Marais, Dec 19, 2014, 8:43 am |
|
VAV Fan control for baseline system 6NC-2009 EAp2: Minimum Energy Performanceposted by Panupant Phapant on Dec 16, 2014, 11:37 pm
We have a rough time seeking to reduce supply fan energy during energy simulations. Could anybody throw some light on the following account: 1.) The project on hand is a plant that... Last reply: Marcus Sheffer, Dec 18, 2014, 10:02 am |
|
Heat gain originating from hooded equipment in energy modelingNC-2009 EAp2: Minimum Energy Performanceposted by Panupant Phapant on Dec 17, 2014, 2:16 am
I am doing energy simulations for a factory. I am seeking advice as to the following situation: 1.) Part 1: Load Estimating, Chapter 7 of the classic Carrier Manual states that “a... Last reply: Marcus Sheffer, Dec 17, 2014, 10:15 am |
|
Duct sealing methodsNC-2009 IEQc5: Indoor Chemical and Pollutant Source Controlposted by John Covello on Nov 20, 2014, 3:19 am
Hello, Can alternative methods for duct sealing be used besides plastic wrap? One of our contractors is proposing using foam to seal the end of the duct openings. From what I can tell the... Last reply: Dylan Connelly, Dec 4, 2014, 7:23 pm |
|
Process Load for ManufacturingNC-2009 EAp2: Minimum Energy Performanceposted by Panupant Phapant on Nov 24, 2014, 4:33 am
Dear All, Last reply: Marcus Sheffer, Nov 25, 2014, 9:23 am |
|
Alternative HVAC duct sealantNC-2009 IEQc3.1: Construction IAQ management plan - during constructionposted by John Covello on Nov 18, 2014, 3:06 am
Hi, My contractor is proposing and alternative method to sealing the air conditioning ducts. They would like to use a foam for the duct end that would be air tight. Their concern is the... Last reply: Michelle Halle Stern, Nov 19, 2014, 1:19 pm |
|
Recycling Facility Letters of CertificationNC-2009 MRc2: Construction Waste Managementposted by John Covello on Sep 19, 2014, 4:05 am
I have a question about doing an overseas project. Do we need some kind of Letters of Certification for the recycling facilities we are using? Do they have to be vetted in some way as a... Last reply: Jon Clifford, Sep 21, 2014, 4:48 pm |