Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

ASHRAE 209 Energy Modeling Standard

SD Leaders
posted by  Julia Siple  on 

I'm curious who in this group has used ASHRAE Standard 209-2018, Energy Simulation Aided Design for Buildings

5
CEO
Green Commons, LLC
LEEDuser Expert
586 thumbs up
Mon Jun 28, 2021, 10:51 pm

Indoor water use reduction

CS-v4 WEp2:Indoor water use reduction
posted by  GABRIELE Medley  on 

For this credit to achieve 5 pts you must show 45% reduction. If you are at 44.95% would that be considered? 

1
Mon Jun 28, 2021, 9:38 pm

LCA for a Structures Lab

SD Leaders
posted by  Stephanie Dalo  on 

Has anyone completed an LCA for an engineering structures lab, particularly one that has a strong wall and strong floor? 

1
Wed Jun 30, 2021, 3:54 pm

Wood Ceilings & Walls in EQc2

NC-v4.1 EQc2:Low-Emitting Materials
posted by  Jerome Burrowes  on 

From what I have seen on other threads in this forum, wood ceilings & walls (tiles, slats, planks, panels, etc.) are expected to comply to CDPH.

0

SCL Quarterly Call: ESG

SC Leaders
posted by  Jennifer Zakrzewski  on 

Hello Sustainable Construction Leaders, 

Mark your calendars! The next quarterly SCL call will be Wednesday, July 28th, 3pm ET (noon PT) and will focus on ESG.

1
Mon Jul 26, 2021, 6:52 pm

Energy Consumption - Gas + Electricity + Energy Generated on-site

NC-2009 EAc6:Green power
posted by  CT G  on 

We're submitting a project where we have 42% of electricity and 58% of gas consumption. And out of 42% of electricity consumption, 9.2% is generated on-site.

1
Mon Jun 28, 2021, 2:25 pm

Baseline Energy Source for Electric only Building energypro

NC-v4 EAp2:Minimum energy performance
posted by  Mike Magee  on 

A bit of a newbie to LEED stuff, but does anyone know how to make the baseline energy source electric in stead of gas?

 

1
Fri Jul 9, 2021, 5:37 pm
2
Mon Jun 28, 2021, 9:43 am