This sounds similar to the situation encountered by zero-lot-line buildings (with no "site" to speak of), which LEEDuser discusses in our guidance on the NC 2009...

Please, correct me if I am wrong!
As I understand it, the energy simulation requirements of EAp2 and EAc1 are NOT identical. If I am correct, for EAp2 you:

Model the proposed design...

HI, We are going at this LEED process ourselves here at Tufts Health Plan and I have a minor question regarding LEED baseline for shower heads. My question: We have about 1700 employees here...

When buying desk lamps, would having Energy Star rated light bulbs be sufficient enough? Or do the actual lamps have to be Energy Star rated?

To what extent is shop labor included in material costs? With increases in shop fabrication, this could be a big issue. Clearly there is labor that goes into the manufacture of every product,...

Hello all,

Regarding light leaking from a high...

That thread is for New Construction, I am working on a Commercial Interiors project. My beef is that most of the other paths in this credit talk about "the existing" whatever (site drainage,...

Yeah, this can be a tough one. First I would check a reference such as the LEED Reference Guide for BD&C for typical...

Good question, but I think you'll find that this approach is not accepted by USGBC/...

I just ran into this problem on a project. One of the anti-corrosive primers was well above the...