Forum quick links
Points awarded not commensurate with Credit Intent
NC-2009 SSc3:Brownfield Redevelopmentposted by Gabriel Moreno on
Just out of curiosity, I wondered if anyone at USGBC could explain why, in regards to LEED certification, would any Owner or Developer would want to go through the trouble of rehabilitating a brown
Commercial Kitchen Equipment
NC-2009 EAp3:Fundamental Refrigerant Managementposted by Angie Allen on
We are working on a full service hotel project. For the commercial kitchen, it is my understanding that the permanent walk-in cooler and freezer units should be included in the credit.
LEED lease
NC-2009 PIf4:Schedule and Overview Documentsposted by Sustentator Argentina on
Does someone know what I'm supposed to upload in the point that says Lease Associated with LEED? Thanks! Romina
My project is registered
CS-2009 IEQc7:Thermal Comfort—Designposted by Alicja Bieszyńska on
My project is registered under LEED CS v2.0, so the requirements may be a little bit different than CS v.3, however I hope you can still be able to help me. If I understand corectly, this credit r
LEED pursuing after building the basement level
CS-2009 SSp1:Construction Activity Pollution Preventionposted by Radwa Amin on
Hi there, We have an office building in Egypt, that its developer wants to pursue LEED, after he had built-up its first basement level. We do have local code which is less stringent than EPA. Co
Factory Applied Steel Finish
CI-2009 IEQc4.2:Low-Emitting Materials—Paints and Coatingsposted by Steven Woods on
How is a factory applied steel finish addressed in this credit?
Recertification
EBOM-2009 EAc2.2:Existing Building Commissioning—Implementationposted by Scott Vitko on
I am unclear as to what the recertification requirements would be for a project that obtained this credit with the original certification about a year ago.
DHC Plant with CFC refrigerant
EBOM-2009 EAp3:Fundamental Refrigerant Managementposted by Noriko Nagazumi on
Our project is served by district heat and cilled water plant. The plant, owned by different componay from our project owner, uses CFC refrigerant for some of chillers.
EIFS and IEQ 4 - Group 5 Exterior Applied Products
posted by Bruce Maine on
Good afternoon. I'm stumped as usual. There seem to be no categories in 1113 or the ARB SCM which addresses the EIFS cementitous finishes.
ACP for IEQp1 uses EU Ventilation Norms
posted by Jean Marais on
Adhering to EN 15251 and EN 13779.