In BD+C-v4.1 LTc4, Option 1, Table 1a, in calculating the...

Hi,

I'm working on a university project which is fed by campus chilled water and steam system. It is ~55000 ft2 so 90.1-2010 baseline system requirement is system 5. I modeled the proposed...

Does anyone have experience with construction waste generated outside of a project's LEED boundary?  We have project that is owned by the city, who is also the waste hauler.  The city is also...

We are working on a 9-story residential project that is being certified v4.1 BD+C: New Construction. The spaces (including all dwelling units) are cooled by VRF indoor units and heated by radiant...

Hi, I'm working on the green cleaning policy, what is compatible with the below in the UK?

• California Code of Regulations for...

I am Robert, First time on an online discussion platform.

How to calculate the gray water amount which will go out from Club buildings application?

and How to calculate the treated water we need for the same building application?

Hello everyone,

We are designing an office building and we are pursuing LEED v4.1. Since almost all the internal partitions are made of glass, we are struggling to find a suitable solution...

if i have office builing will have LEED bd+c and it contain bank &cafe& shop at ground floor 

can i count them under option2 diverse uses

So often I am running calculations needing to meet LEED requirements for light tresspass and needing to hit .1FC which is abusurd. Most times we are putting sheilding on the fixtures which...