Topic | Recent |
---|---|
Mixed Use apartment complexMid-Rise-v4 LTc4: Community resourcesposted by katie nguyen on Jan 15, 2021, 12:42 pm
I am working on an apartment building that will have retail, offices, and restaurants on the bottom floor. Can I count these uses? |
|
PV Degradation Losses overtimeNC-v4 EAc5: Renewable energy productionposted by Michael Keohane on Jan 19, 2021, 10:42 am
Hi I am looking to find out if when completing PV annual output calculations for a new onsite installation that only conversion and transmission losses based the first year operation meets... |
|
Alternative solution to lighting controls for multioccupant spacesSchools-NC-v4 EQc6: Interior lightingposted by Rose-Marie S. on Jan 20, 2021, 7:51 am
Hello, We are currently designing a school according to LEED v.4. Regarding interior lighting for multioccupant spaces, the following needs to be considered: "Have in place... |
|
non-scope considerations and exclusions in ASTM 1527Healthcare-v4 SSp2: Environmental Site Assessmentposted by Chris Flint Chatto on Jan 20, 2021, 12:53 pm |
|
MERV Filters for AHUs operating during construction.CS-v4 EQc3: Construction indoor air quality management planposted by Shannon Oletic on Jan 21, 2021, 4:38 pm
Our CS project has only duct drops into the space (no distribution, diffusers, grilles). If we were to run a portion of the air handing units for temporary heating are... |
|
MERV 8 + MERV 14 Filters Pressure Drop Credit of Precool AHU (PAHU) in BaselineNC-v4 EAp2: Minimum Energy Performanceposted by Thiag B on Jan 21, 2021, 11:41 pm
When PAHU (... |
|
Mix coefficients from the International Energy Agency CO2 Emissions from Fuel Combustion 2017 reportNC-v4.1 EAc2: Optimize Energy Performanceposted by Dang Thi on Jan 25, 2021, 10:29 pm
We have a project to persue LEED ZERO Carbon. However, we can not find mix coefficients from the International Energy Agency ... |
|
EQpc123- Designing with Nature, Biophilic Design for the Indoor EnvironmentPilot-Credits EQpc123: Designing with Nature, Biophilic Design for the Indoor Environmentposted by Faye Moon on Jan 26, 2021, 4:01 pm
I like how this pilot credit aligns with multiple concepts in WELL. We are pursuing LEEDv4 along with WELLv2 for our project and I was able to use the similar information for this pilot as I did... |
|
Excluded areaND-Plan-v4 SLLc1: Preferred locationsposted by Blanca de la Fuente on Jan 27, 2021, 7:53 am
Hello, I've a doubt regarding the excluded area to calculate the land area within the 800m-boundary, in the guide it is written: "When determining area, include street rights-of-way.... |
|
Radon Requirements for LEEDv4 Residential UnitsNC-v4 EQp1: Minimum indoor air quality performanceposted by Jessica Malta on Jan 27, 2021, 11:21 am
Hi, We are working on a high-rise MURB project and trying to meet the radon requirements outlined in the reference guide. The reference guide has listed 5 different standards (EPA Building... |