How do you classify primers? The new addenda for the reference guide lists the GS-11 table:

Interior Flat Coating or Primer, 50 g/L
Interior Non-Flat Coating or Primer, 150 g/L

checked with the School's forums on this site? Log in or register to post comments Michelle Rosenberger Partner ArchEcology LEEDuser Premium Member 497 thumbs up December 7, 2011- 3:55 pm Hi Susan,...

To earn this credit all we submit is the plan which basically says we're going to recalibrate and we'll deal with any problems later, right? Is there any backcheck from...

I am confused about documentation requirements. The template states that vendor invoices are required on a line item basis... but if they're line items, they're not the original invoices. I can't...

We have the following case:

We bought several door with the following characteristics according to the cut sheet:...

Hi,

We have existing Library project with combined multiple zone and single zone. We used the V4.0 form as per requirement during initial review, however, our IEQp1 has been denied with...

is the electrical rooms and internal swimming pools cooling is considered as a process load or not?
and what leed reviewer should see in the energy model output.

regards

Dear alls,
I am so confused about the exception for ceramic tile for FloorScore. Normally the ceramic tile has a coating process before burn with high temperature so...

Hello,

I'm working on a project where a very large amount of the soil had to be removed due to contamination (we are pursuing SSc3) and clean soil had to be brought in from off-site. The...

Hi,

I have a doubt related to the system fan power calculation described in section G.1.2.9.
This section states that "system fan electrical power for supply, return, exhaust, and...