Log in
Forum
Topic

Temporarily empty building

EBOM-2009 EAp2: Minimum Energy Efficiency Performance
posted by Frantisek Macholda on Aug 29, 2012, 4:43 am

Hello,
we have an office building in Slovakia that was occupied by one tenant till this summer. Now, the tenant left the building and an owner prepares a partial reconstruction (cooling...

Last reply: Frantisek Macholda, Aug 29, 2012, 7:13 am

Table PIf3-3 Total Daily Occupancy

General forums
posted by Dale Dunnet on Sep 7, 2012, 4:48 pm

I have read several questions/ replies in the forum, but am still unclear. Some background: We have a 70k warehouse attached to a 20k office. The entire facility has 12 FTEs. The warehouse gets...

Last reply: Michael Smithing, May 28, 2013, 11:25 am

IEQp1 Design Supply Air Question

EBOM-2009 IEQp1: Minimum indoor air quality performance
posted by AshLee Eustace on Sep 18, 2012, 3:05 pm

Hi,

For the Design total supply to zone (Vdzd) and Design total supply airflow (Vpsd), should those numbers reflect the design flow at the condition analyzed? For example, if I am...

Last reply: Jerry Scott, Mar 11, 2014, 7:42 pm

High cost of energy improvements

EBOM-2009 EAp2: Minimum Energy Efficiency Performance
posted by Paulo Pinheiro on Sep 25, 2012, 11:01 am

Our building don´t have a good energy efficiency, the...

Last reply: Paulo Pinheiro, Sep 26, 2012, 10:21 am

"Site energy" usage for a multiple building project

EBOM-2009 EAp2: Minimum Energy Efficiency Performance
posted by Chris Miller on Sep 25, 2012, 10:09 pm

A small site has two office buildings, a storage building and parking lot. For this multiple building project (not campus) seeking LEED EB-O+M certification, energy usage data from each building...

Last reply: Chris Miller, Sep 27, 2012, 9:56 pm

Permanently Dimmed LED Lamps

CI-2009 EAp2: Minimum Energy Performance
posted by Luis Miguel Diazgranados on Sep 28, 2012, 6:24 pm

Greetings Everyone,
We are working in a CI project, in which, by error, the lightning contractor obtained some LED bulbs with a larger wattage than the lightning designer specified wattage...

Last reply: Luis Miguel Diazgranados, Oct 4, 2012, 1:22 pm

Definition of "conditioned space"

CS-2009 EAp2: Minimum Energy Performance
posted by FABIO VIERO on Oct 2, 2012, 6:22 am

Hello all,
a little question about the definition of "conditioned space". I have some spaces wich are not occupied and unconditioned (for exemple storage or technical spaces): do i have to...

Last reply: Marcus Sheffer, Oct 24, 2012, 10:21 am

Adhesive used in the project to bond laminate to wood substrate

CI-2009 IEQc4.4: Low-emitting materials - composite wood and agrifiber products
posted by Marie Kranjack on Oct 11, 2012, 11:19 am

We just had this credit denied in our Design and Construction Final Review. We provided all of the required documentation, but the final comment came back stating that we failed to provide "the...

Last reply: Catarina Costa Goncalves, Sep 26, 2023, 9:55 am

Green Roof modeling for EAc1

NC-2009 EAc1: Optimize Energy Performance
posted by Kalyan Nishtala on Oct 15, 2012, 5:33 pm

Research regarding the energy benefits of green roofs is really sparse from my experience. Multitude of forums have had discussions on this topic, and the unanimous verdict seems to be that there are no real...

Last reply: Kalyan Nishtala, Oct 18, 2012, 1:55 pm

Demand control ventilation

CS-2009 EAp2: Minimum Energy Performance
posted by FABIO VIERO on Oct 19, 2012, 10:42 am

Hello all,
is it true that "Whenever credit is taken for demand control ventilation in the Proposed Case, the outside air ventilation rates for the Baseline Case must be modeled using...

Last reply: Marcus Sheffer, Oct 24, 2012, 10:44 am