Log in
Forum
Topic

Regarding Performance Period for LEED O+M (EB)

EBOM-2009 EAc1: Optimize Energy Efficiency Performance
posted by Ramesh Narayanan on Oct 13, 2010, 11:52 pm

Hi Friends,
I knew that all the credits and prerequisites should have the performance period of 3 months except EApr2 & EAcr1 which is required minimum of12 months energy consumption...

Last reply: Tristan Roberts, Oct 15, 2010, 6:34 am

Registering to P9

Pilot-Credits PC9: Street Network
posted by Simon Sue on Oct 13, 2010, 6:47 am

Hi,
i have few LEED project on hand and would like to attempt this credit for all my projects . Do i need to register all these projects into "Pilot Credit Library Project Registration...

Last reply: Tristan Roberts, Oct 15, 2010, 6:04 am

post under specific credit forum

General forums
posted by Tristan Roberts on Oct 15, 2010, 6:00 am

Hi Rick, good question, but would you mind re-posting it under one of our specific credit forums? Knowing exactly which rating system and credit you're contemplating...

Very large complex DES

General forums
posted by Lise Dannesboe on Oct 14, 2010, 8:54 am

Hi

I'm trying to certify a building in Denmark which is connected to the local district heating system. This system delivers district heating to about 275.000 households, the plant is...

Last reply: Lise Dannesboe, Oct 15, 2010, 1:09 am

Advanced Energy Design GUide for Small Hospitals- 50%

NC-2009 EAc1: Optimize Energy Performance
posted by Margaret Montgomery on Oct 13, 2010, 2:22 pm

THere's a new ASHRAE guide for small hospitals and healthcare facilities with prescriptive guidance for 50% energy reduction. I see that AEDG healthcare hasn't been included in the list of...

Last reply: Margaret Montgomery, Oct 14, 2010, 6:51 pm

Calucation Question

EBOM-2009 SSc6: Stormwater Quantity Control
posted by Nell Boyle on Oct 1, 2010, 11:50 am

Can you please tell me what the difference is between the percentage listed as "Percentage of storm rainfall volume mitigated" and the second percentage "Design storm rainfall mitagted" ?

Last reply: Amy Rider, Oct 14, 2010, 6:26 pm

M&V For Industrial Facilities

NC-2009 EAc5: Measurement and Verification
posted by Mary Frances Stotler on Oct 14, 2010, 11:31 am

We're designing a food processing plant that will have systems in place to monitor the overall loads of the entire building. The drives read the information from all MCCs and determine the...

Last reply: Marcus Sheffer, Oct 14, 2010, 12:07 pm

Outdoor air flow and primary supply air flow

Schools-2009 IEQp1: Minimum indoor air quality performance
posted by Maya Karkour on Oct 11, 2010, 7:51 am

Dear all,

I have a...

Last reply: Roger Chang, Oct 14, 2010, 8:31 am

Change in WEc4 in LEED 3.0 vs. 2.0/2.2

Schools-2009 WEc4: Process water use reduction
posted by Suzanne Painter-Supplee, LEED AP+ID&C on Aug 20, 2010, 1:11 pm

I see that there is a subtle change in WEc4 in LEED v3.0 over v2.2 that has some of my food service consultant clients very concerned. And with good reason because their kitchen's performance can...

Last reply: Suzanne Painter-Supplee, LEED AP+ID&C, Oct 14, 2010, 12:56 am

LEED for Schools EQ Credit 8 Supporting Calculator

Schools-2009 IEQc8.1: Daylight and views - daylight
posted by Esmeralda Ward on Oct 13, 2010, 7:09 pm

Hello all,
Has anyone had any success in adding fields to the calculator in order to list more classrooms? The EQ-8 calculator under the 2007 Schools version only has space for 5...

Last reply: Esmeralda Ward, Oct 13, 2010, 7:49 pm