I plan to submit the Carrier HAP load data for Load calculations and an April load data for Part Load Calculations, but I am not sure what to include for the Fan sizing and zone-by-zone load calcul

We need some help selecting the ks in our project. We are considering the following factors: Ks=0 for native species (no irrigation) Ks= Low. For adaptative species. Low watering. Ks= Average.

If existing site (or off-site) concrete is crushed and used for sub-grade base, is that re-used or recycled?

I have two questions concerning Task Lighting: 1- for an office building, should I count task lighting as process load? 2- For Base-case Simulation, does the LPD limit set by ASHRAE 90.1 include

Context: I submitted my design review, addressed all comments and even submitted an appeal.

Hello, Does anyone know if we can use paints or coatings with VOC content well above the LEED requirements, as long as the envelope walls are not yet constructed (i.e., the surfaces are considered

Everyone I know that read the v4 draft from cover to cover voted against it.

My project has completed design review, and construction is nearly complete. Owner has occupied the building.

Has there been any commentary on whether how "e-cigarettes" align or do not align with the intent of this credit?

I am working on a project that is on a busy road. There are a couple of bus stops (two different routes) on the other side of this road from my project.