I am working on a reastaurant project and have 3 questions 1 Do we need to provide Five types pd recycles as required by LEED or can we provide only the type of wastes generated by the building ty

For some reason our building to site ratio percentage is extremely high (197%). The building 4 floors with a basement and a rooftop mechanical room. The total sf is 155545sf.

LEEDusers, I have the opportunity next week to speak with the team at USGBC that has been working on AGMBC Part 2. Yes, the long-awaited Part 2.

Thanks in advance. I have seen conflicting directions on whether and which process system need to be Cx'ed.

I am trying to determine if the VOC content in a flooring we used meets LEED standards.

How to calculate the water saving if we use metering faucets for kitchen sink?

As a specifier, applying the Cal DPH standards can be like shooting in the dark.

I have a project with 14 small rooms (

Our project has several spaces with electric transformers where we are using an exhaust fan and an outside air louver to relieve the heat loss from the transformer.

I have a material that was extracted 425 km from the manufacture point and transported by truck. After manufacture the material was shipped via rail to the project site which is 2076 km.