Hi,

I am modeling a C&S building for the Construction Submittal, and I have to adjust the Design Submittal Energy Model because the Owner change the brand of the VRF systems.

...

Very curious why both LEED 4 and 4.1 restrict the Candidate List to "the version in effect June 2013"? The wording appears to indicate that of the 3 lists, only the Candidate list is restricted...

I have a client planning a complete fit-out of one of their retail spaces. The project is located in a resort in Las Vegas, which is attached to a Casino that allows smoking. Smoking is...

The credit language reads all "occupied spaces." Is that really the intent? Or is it all "REGULARLY occupied" spaces? 

guidance. Please see on this discussion for more (https://leeduser.buildinggreen.com/forum/emissions-testing-previous-cdph-v11-2010-vs-cdph-v12-2017) I do not have answer for the Calculator. Someone else...

Hello, 

We are attempting this credit for an Innovation point for a v4 CI project. Within the CI scope, only LEDs have been installed. Is a calculator still required if there are no lamps...

We are attempting to work on a project in LEEDv4.1, which in Optimize Energy Performance states that ASHRAE 90.1-2016 mandatory provisions must be met. However we are wondering if the following...

Hi All, 
I am trying to prep a presentation outlining some of the tools available to perform the "Whole-Building Life-Cycle Assessment" that are used in LEED.
I am aware of Tally (...

Is the LEED AP certificate of BD+C accepted for ID+C projects? Or would a Legacy LEED AP certificate be accepted - We have both persons working on the project not sure which to upload. Can...

Hello

I have issues simulating a water cooled coil (software limitations), and so I’m trying to simulate an equivalent thermodynamically system. I want to know if this methodology is valid...