Based upon G3.1.10 (d) “Where no cooling system exists or no cooling system has been specified, the cooling system shall be identical to the system modeled in the baseline building” Does this mean

Hi Everyone, Regarding one of the FAQ's above in the birds eye view section with regards to gender ratio.

According to the Healthcare reference guide under MRc5 Section 8 Examples: "furniture that meets the criteria for more than one option can be counted twice".

Can direct reading instruments be used to measure VOCs and PM10? Another user asked specifically about the GrayWolf IAQ equipment and I was also wondering if it can be used for EQc3.2.

Dear All, Our project has a signed agreement with a nearby university, valid until June 2013.

My LEED boundary consists of the following: a) A Commercial building b) Three small service buildings ( one which is a substation ) c) A swimming pool d) A tennis court My question is as follows

Will LEED round up the saving percentage to the nearest integer? e.g. 19.8% to 20%? Thanks in advance

Hello, We have a project in Russia under LEED for CS-2009 sertification. There are technical rooms with epoxy flooring. 1) Can anybody confirm if I am wrong or right?

Does anyone have experience doing envelope commissioning for an existing building? The project will be a Major Renovation with fairly extensive HVAC upgrades.

We registered the Project for LEED CI. A space of about 2000 sqft. As the space was small the client was able to outfit the space in 3 weeks time and occupied the space immediately after.