Dears, Our project is aiming for innovation design credit of 100% FSC certified wood, my concern is about does (FSC mixed) certified product contributing to this credit or only the (100% FSC) cert

If a client owns all of the interior space, then I assume that they would obtain this credit, since they pay all of their energy and water bills. Would I be correct?

Hello Everyone: I am working in an office building project located in Galicia (Spain). We are carrying out the selection process of the heat pump for the air conditioning of the building.

Hi, I've been searching for LEED v4 Canadian Construction Documents (01 35 21), but the update hasn't been performed yet.

When we calculate "regulary occupied space" for EQc8.2, is it supposed to be inside of wall or "center on center" ?

For low-rise multifamily buildings is it possible to show compliance with this prerequisite by achieving a HERS index of less than 75?

Greetings, The project we are modeling at the moment is supposed to have exterior lighting for the facades, some parking lots and some walkways. The exact LPD however is still to be calculated and

Hello. Two questions: Are existing constructions required to be part of the project stormwater management? The reference book wording refers to "management plan for the project".

Greetings, In our project (registered as per LEEDv2009) there are several garage ventilations. According to ASHRAE 62.1-2007, the garage exhaust rate is to be sized to 0.75 cfm/ sq.ft.

Dear All Our Project have CHP (2 CNG Generator 500Kw with VAM Chillier 100TR) what is rate we use for BASE Case and Design Case For Design case we use the Fuel(CNG) cost invested to run a Gener