Forum quick links
LEED Green Associate Exam!!! Leedv4
posted by Julian Laze on
Hi Paula. Thanks for your information and your tips... I have the book, but at the end of each chapter I'm seeing questions that I never crossed reading the chapter.
LEED Core and Shell 2009 (V 3) for IEQ c1, IEQ c5 and IEQ 6
CS-2009 IEQc1:Outdoor Air Delivery Monitoringposted by Himanshu Dehra on
We wish to attempt and submit documentation {LEED Core and Shell 2009 (V 3)} for following credits (with no control on Tenant Spaces): 1. Outdoor Air Delivery Monitoring (IEQ Credit 1); 2. Indoor C
LEED SSc7.1 Heat Island Effect - Nonroof
NC-v4 LTc1:LEED for Neighborhood Development locationposted by Ernesto Agco on
Could anyone care to show me a sample SSC7.1 documentation that was already approved by USGBC? Or even just a format that is easy to follow. :)
Sample Documentation
NC-2009 SSc7.1:Heat Island Effect—Non-Roofposted by Ernesto Agco on
Could anyone care to show me a sample SSc7.1 documentation that was already approved by USGBC? Or even just a documentation format coming from an approved submission. :)
site boundary questions
Healthcare-v2009 MPR3:Must use a reasonable site boundaryposted by Carrie Laurendine on
we set our site boundary per USGBC rules on this (building, portion of site regularly used by and relating to function of the building, etc).
Compliance for Existing Site Features
Pilot-Credits PC14:Walkable Streetsposted by Vicki Rybl on
I am working on a project where most of the site hardscape is existing. I'm looking for an opinion specifically on two of the requirements for this credit. 7.
Hardscape for exterior wall pool deck
EBOM-2009 SSc7.1:Heat Island Reduction—Nonroofposted by Karla Chavez on
Would a white glazed wall tile qualify for LEED credits if placed on the hardscape around an exterior pool deck?
If you are already meeting SS c8...
Pilot-Credits SSpc55:Bird collision deterrenceposted by Cynthia Kaplan on
...Then the lighting requirements for SS pc55 should be a foregone conclusion, no?
Baseline Fenestration - Existing Buildings
CS-2009 EAc1:Optimize Energy Performanceposted by Ciaran McCabe on
How should one model existing glazing U-Values and Solar Heat Gain values when they are unknown (they were installed 24 years ago). I am referring to the Baseline Model ASHRAE Table G3.1 5f
Lighting steps vs on/off
CI-v4 EAp2:Minimum energy performanceposted by Jorge Lopez de Obeso on
Hello everyone, I am currently working on a LEED for CI v4 project.