Log in
Forum
Topic

Hot-mopped asphalt

Schools-NC-v4 EQc2: Low emitting materials
posted by John Mlade on Jan 15, 2025, 3:58 pm

Hi all,

Hoping someone can shed some light on what happens if hot-mopped asphalt is used on a LEED v4 schools project, whether inadvertantly or because of specific site considerations....

Last reply: Deborah Lucking, Jan 15, 2025, 4:15 pm

Owner Purchased Contractor Installed

NC-2009 MRc5: Regional Materials
posted by Jessica Kilby on Apr 2, 2013, 3:07 pm

I have not come across this situation before, but the Carpet for our entire building has already been purchased by the Owner. The way I read MRc5, we should not count this material towards the...

Last reply: john benita, Jan 15, 2025, 2:03 pm

EV Charger Energy

NC-v4 EAp2: Minimum Energy Performance
posted by Cory Duggin on Nov 19, 2021, 3:10 pm

Does the energy use for EV chargers have to be included in the energy model if you are going after the Electric Vehicles credit?  I thought I had read somewhere that EV charger energy was...

Last reply: William Poveda, Jan 14, 2025, 11:11 am

STC requirement for a Retail area next to a hallway in a medical building

NC-v4 EQc9: Acoustic performance
posted by Todd Bundren on Dec 18, 2024, 4:04 pm

We are working on a new medical buidling (cancer center) and there is a gift shop off a large corridor close to the main entry. The owner wants the wall between the gift shop and the large...

Last reply: Catalina Garcia, Jan 13, 2025, 10:24 pm

Modeling Electric Unit Heater

NC-2009 EAp2: Minimum Energy Performance
posted by Nishank Shah on May 10, 2018, 9:07 pm

I have to model electric unit heaters in HAP for spaces like Stairs, Trash rooms, Vestibules etc. The issue is that the Stairs are already served by heat pumps and electric unit heaters will turn...

Last reply: Khaled Fouda, Jan 13, 2025, 11:33 am

ASHRAE requirements for cooling towers

CS-2009 EAp2: Minimum Energy Performance
posted by Agnieszka Rylska on Dec 8, 2015, 5:14 am

As part of this Prerequisite we have to provide cooling towers that comply with requirements of section 6.4 of 90.1-2007 ASHRAE Standard. In Table 6.8.1G there are performance requirements listed...

Last reply: Nikunj Verma, Jan 11, 2025, 3:39 am

How to Model OA if the Outdoor unit selected is bigger than Min OA

NC-v4 EAp2: Minimum Energy Performance
posted by Rajat Wadhwa on Jan 3, 2025, 6:25 pm

Hi, 

WHat is the right way to model OA for LEED if Outdoor unit selected is bigger than what we sized for, for example for an RTU if the Min OA sized is 16,000 CFM but we selected...

Last reply: Rajat Wadhwa, Jan 10, 2025, 2:54 pm

Modeling Baseline system for an Aquatic center

NC-v4 EAp2: Minimum Energy Performance
posted by Rajat Wadhwa on Jan 3, 2025, 6:28 pm

Hi , I am modeling an aquatic center for LEED V4, with the floor having radiant heating , what should be the baseline system for radiant heating for floors in baseline?

TIA

...

Last reply: Rajat Wadhwa, Jan 10, 2025, 2:53 pm

VOC content evaluation- replacement in EU

NC-v4.1 EQc2: Low-emitting materials
posted by Monika Fabiánová on Aug 26, 2024, 6:47 am

Hello.

Our project is in the European Union- I would like to know if there is any replacement in the certificate for...

Last reply: Sara Axon, Jan 10, 2025, 11:49 am

Transportation Survey Transit Methods- Boat/Ferry

EBOM-v4.1 LTp1: Transportation Performance
posted by Drew Yetter on May 8, 2024, 11:41 am

The transportation survey does not have boat/ferry listed as a travel method to select. For respondents that utilize a boat or ferry as part of their daily commute, how should a respondent...

Last reply: Chad Goucher, Jan 10, 2025, 11:34 am