Hello, May I seek anyone's advice on how to determine the lighting power density for data hall while there is no criteria in ASHRAE 90.1? I have ever heard of 0.8 W/ sf (treating similar to activ

In the reviewers comments a query has been raised that the parking space allocated to demonstrate Car Pooling is not a preferred parking space - the two closest to entrance to the building are des

Hello, I need a clarification on how to calculate the percentage of recycled content for a specific material on my project. For example; My fiber glass insulation has 9% post consumer recycled cont

Under which category does a concrete volume stabilizer classify? It´s a granular powder without metal particles, ready mix which only needs water.

Dear all, I'm working on a passive building in which it was decided, as energy efficiency technique, to be buried.

I'm working on a model for a system designed for a small classroom building and have concerns on the proper baseline and proposed system ventilation rates.

My campus is considering registering our entire campus site (1400+ acres) under LEED for Campus. To whom do I issue the registration fee check - to USGBC or GBCI?

We have 2 AHUs supplying OA to individual FCUs via a separate duct as per ASHRAE 62 intake requirement. The mixing occurs at the individual FCUs and then supplied to the zone.

Hi, we are working on an office tower EBOM project and one standard review remark concerned the absence of kitchen sinks.

Table G3.1.1A states that buildings that are “…eligible for more than one baseline system type should use the predominant condition to determine the system type for the entire building except as no