Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

Charging Station Location

NC-2009 SSc4.3:Alternative Transportation—Low-Emitting and Fuel-Efficient Vehicles
posted by     on 

This project is a small Inn that has a small parking lot onsite and a larger parking lot outside of the project boundary.

3
Default Avatar
LEEDuser Basic Member
0 thumbs up
Wed Oct 4, 2017, 8:02 pm

CI V4- Innovation: Green Vehicles

CI-v4 INc1:Innovation
posted by  Oliver Bate  on 

My project has 30% of carparking reserved for electric vehicles. The plugs used comply with an IEC standard but not the one specfied in the credit requirements.

0

Information on 10 years canopy

CS-v4 SSc5:Heat island reduction
posted by  Marianne Vajstedt  on 

Do you know where information can be found to determine the daimeter of trees after 10 years of planting? Our landscaping architect have only the information in maturity.

1
Mon Oct 9, 2017, 1:52 pm

Baseline LPD for a Vehicle Driving Test ground

NC-2009 EAp2:Minimum Energy Performance
posted by  Aru Sau  on 

There is Car Driving Test Ground located outside the building, which takes power from the substation inside the building. This ground is closely resemblance of a space like car racing (i.e.

1
Thu Oct 5, 2017, 3:11 pm

Project has shuttle to train station

NC-v4 LTc5:Access to quality transit
posted by  Lou Niles II  on 

The train station is just about 1mile from the projectHello I have a project in California with multiple shuttles that run short routes in the area of this NC building.

1
Fri Nov 3, 2017, 7:24 pm

BPDO Calculator

CI-v4 MRc3:Building product disclosure and optimization - environmental product declarations
posted by  Casey Krieg  on 

Beginning to document the EDP's and such for this credit and in the resources tab under the credit I found the BPDO Calculator, which is an excel spreadsheet tool to help document and organize your

2
Project Director
WSP USA
LEEDuser Basic Member
381 thumbs up
Tue Oct 3, 2017, 9:04 pm

Manufacturer Take Back Programs

NC-v4 MRc5:Construction and demolition waste management
posted by  Leanne Conrad  on 

I am looking for information on what type of backup documentation is required when we choose to use a manufacturer take back program as part of our recycling program.

3
Default Avatar
LEEDuser Expert
472 thumbs up
Mon Oct 31, 2016, 4:09 pm

High Density Filing Systems

CI-2009 IEQc4.5:Low-Emitting Materials—Systems Furniture and Seating
posted by  Jason Cocek  on 

Does anyone know how high density filing systems fit into the IEQ credits for CI if at all?

0

Single-zone, multiple systems

CS-2009 IEQp1:Minimum IAQ Performance
posted by  Nate Steeber  on 

Hey all,

I'm sorry if this is a repeat, I tried to search for this specific issue in the forum, and cannot find anything.

0
4
Sustainability Consultant; Project Manager
Henderson Engineers and Sustainable Design Consulting, LLC
LEEDuser Basic Member
9 thumbs up
Mon Oct 2, 2017, 3:59 pm