Dear all, I have a doubt regarding compliance with EAp2 in a CI certification.
It will be a CI certification of 8 floors in a recently LEED CS certified building.
As the building is...

Hi All,

My first post here... I really hope it works!

I'm LEED AP for the project working with a 3rd party engineer who has advised:
"Why the CRACs don't comply is because the...

Hi, I have a question regarding the Space Controls.
The controls installed, control the spaces remotely and they are located inside the electric panel. The controls have a color indicator (...

We recently purchased a 7,000 SF, 1-story office building for our own use. We are attempting LEED CI Platinum but are not touching the exterior walls or roof. They do not meet ASHRAE 90.1 2007...

Are the requirements for Energy Star office equipment,electronics and appliances only for those which are newly purchased? if they were existing from before or brought over from the tenant's old...

Lighting system refurbishment, plumbing system refurbishment, rainwater ulilization system installation and purchasing some pieces of Energy Star rated equipment are included within our CI...

Hi everybody;

The reference guide states "Project teams wishing to use ASHRAE approved addenda for the purposes of this credit may do so at their discretion. Addenda must be applied...

For LEED ID+C project, Do we have to include the entire building for energy simulation modeling? or just tenant scope of work

Thanks in advance

Greetings,
We're doing a CI project where the glazing far surpasses the 40% wall area allowed on the north wall. However, the envelope will not be altered for this project. Does this mean...

I'm bringing up a topic discussed but not solved in previous comments. What does the USGBC include in "equipment installed as part of the tenant's scope of work"? They list appliances, office...