In order to calculated the points relative to NC-v4 EAc2 - Optimize energy performance shall the produced electric energy from a renewable source that is sold to the national grid be...

I have managed to create a rather impressive energy reduction between the baseline and proposed elevators. I am using IES software to the energy calculations and I have both baseline and proposed...

Hi,

We are doing an energy model for a Leed assessment of a convention centre. Weust are not sure on the rules with the Leed assessment, if small power loads should be included in the...

The problem I am having is that I have to select a system for the baseline model which is System 7...

How many points can be claimed if project is served with 100% Renewable Energy?

For LEED V4 NC, we need to demonstrate 5% of Energy Savings compared to ASHRAE Baseline through Energy...

Is there a different Table 1: ASHRAE 90.1-2013 Appendix G percentage Improvement that we can use for those projects under LEED v4 but using ASHRAE 90.1-2013?

If so, please forward.

...

Is there a...

The LEED v4 Guide steps that it's possible only apply any savings from ON-SITE...

Hi,
I am trying to work out the best way to model a heated (cold climate) bus storage facility in the baseline. The proposed has supply fans and exhaust fans with heat recovery and a...

LEED V4 homes awards ( and generously) for residential projects with areas smaller than an accepted reference standard, and deducts points for residential units exceeding these standards. Anyone...