Forum quick links
Ventilation design-worst case conditions
CI-2009 IEQp1:Minimum indoor air quality performanceposted by S Nagarajan on
How to provide a narrative to explain how the worst-case condition was determined considering the total design airflow rate at the condition analyzed
LEED certification fees
posted by Nazli Hussain on
Can you please tell me about all compulsory certification fees to get LEED certification? Registration fees, split / combined design review fees , appeal fees - all are compulsory . Am i right ?
Reclaim land for more than 40 years
NC-v4 MPR1:Must be in a permanent location on existing landposted by Michael Wahjudi on
"All LEED projects must be constructed and operated on a permanent location on existing land" from these statement.
All controls provided using customised mobile app
NC-2009 IEQc6.1:Controllability of systems - lightingposted by Yusuf Turab on
We are working on an IT office building that does not have any switches to control lighting.
Purchasing- Ongoing
EBOM-v4 MRc1:Purchasing - ongoingposted by VISHESH AGARWAL on
what percentage of documentation should be required in local food material (100 miles).
Can a Retail CI Project achieve Water Cr if it has no Rest rooms
Retail-CI-v2009 WEc1:Water use reductionposted by Aswin M on
Can a Retail CI 2009 (restaurant) project achieve Water use reduction credit, if there is no Rest room in the (Retail CI) project scope.
CI for Hospital;
CI-2009 SSc3.1:Alternative transportation - public transportation accessposted by Ajay Kumar on
This project has about 4 public bus stops located within 1/4 mile of walking distance from project entrance.
LEED Platinum
EBOM-2009 EAp1:Energy efficiency best management practices - planning, documentation and opportunity assessmentposted by Muzammal Abbas LEED AP (BD+C) on
We had submitted one of our LEED EBOM V4 project final review and received 72 points. We had accepted the review and received Certified Gold Level.
Modeling pump, fan, COP
CS-2009 EAp2:Minimum energy performanceposted by Indochine Engineering VN on
Hi, I have many chilled water pumps, 1 primary and 3 loop secondary pumps with heat exchangers.
Heat gain originating from hooded equipment in energy modeling
NC-2009 EAp2:Minimum energy performanceposted by Panupant Phapant on
I am doing energy simulations for a factory.