if actual Rc (lb/ton) of the chiller and other refrigerant units are unknown then will i able to take default.

I am doing a project in Lahore, Pakistan for the British Council. It is a 6,000sf library located on a 50,000sf site.

Hi Marcus Sheffer, i am totally confused please guide me.

We are currently working on an EBOM Retail project which is undergoing fit out works to the common mall and tenant areas.

The project is installing VRV units of Daikin (VRV Model # RXYQ18PY16).

We have campus project from building entrance to the 1st bus stop near about 520m. Is it possible to apply this credit.

Hi For a project using an adhesive for HVAC duct insulation, what should be the VOC limit that should be followed for since the standards does not mention any value directly for the insulation adhe

Hi everyone, The project is cosmetic and medicine manufacturing with office. My question is, What difference between detailed manufacturing and Low/High Bay in ASHRAE90.1-2007 table 9.6.1?

I am working on LEED boundary for Factory building. The factory has two buildings with common car parking but we are applying LEED certification for only building - 1.

Hi, We have Core & Shell project while calculating the area of the locations, Pif and EAp2 have difference approximately 4% please let us know what is the maximum percentage deviation. Thank y