Post a question or comment
Location Filters
Filter by location
Forum
Topic
Replies
Recent

Apartments in university dormitory

NC-v4 EAp2:Minimum energy performance
posted by  Cory Duggin  on 

Is it correct that an apartment in a dormitory should be documented as a residential dwelling unit in the MEPC on the multifamily tab but the dorm rooms should not as they are not complete dwelling

2
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4461 thumbs up
Tue Apr 7, 2020, 3:02 pm

Student trying to calculate FTE's for Senior Design

Calculating FTEs
posted by  Lauren Townley  on 

Good afternoon, I am trying to calculate some savings for various fixtures and I am having trouble coming up with the minutes usage for my calculations. Here is what I have so far.

1
Tue Apr 7, 2020, 5:06 pm

RE: EPD's For Assemblies or Whole Products (Mortars and Grouts)

NC-v4 MRc2:Building product disclosure and optimization - environmental product declarations
posted by  John Doherty  on 

I am reviewing the benefit of generating EPDs for our pre-blended mortar and grout products and the challenge is the guidance via the new rules of LEED v4.

2
Editorial Director
BuildingGreen, Inc.
LEEDuser Expert
159 thumbs up
Mon Apr 6, 2020, 3:40 pm

LEED Project boundaries with Shared Elevator/Restroom Cores/Lobby

CI-v4 MPR2:Must use reasonable LEED boundaries
posted by  Brian Kish  on 

I am working in a 9 story, existing building in downtown Pittsburgh, PA.  Our client has 3.5 floors of area that is part of our project scope of work.  The lobby, restrooms, elevators/sta

1
Tue Apr 7, 2020, 5:13 pm

Project in a resort attached to casino that allows smoking

CI-v4 EQp2:Environmental tobacco smoke control
posted by  Anna Kaelin  on 

I have a client planning a complete fit-out of one of their retail spaces. The project is located in a resort in Las Vegas, which is attached to a Casino that allows smoking.

5
Tue Mar 31, 2020, 6:48 pm

Mechanical Equipment that serves our LEED project is located on the roof of a different (non-certified) Building

Healthcare-v4 MPR2:Must use reasonable LEED boundaries
posted by  Gordon Ingerson  on 

I am working on a BD+C: Healthcare project that is a new building addition adjacent to an existing hospital.

1
Fri Apr 3, 2020, 2:41 pm

Cabinet Unit Heaters and Propeller Unit Heater

Schools-NC-v4.1 EQp1:Minimum Indoor Air Quality Performance
posted by  Dan Cottrill  on 

Hello - are cabinet unit heaters and propeller unit heaters required to comply with IEQp1 / ASHRAE 62.1 section 5, systems and equipment?

0

Thermal Comfort Control - Open Office Area

NC-v4 EQc5:Thermal comfort
posted by     on 

We are working on a new media center for a University in Hawaii.  In our second review, we were asked to list out individual workstations in our only Individual Occupant Space, rather than the

2
Thu Mar 26, 2020, 3:44 pm

Duct sealants and wallpaper emissions testing

CI-v4 EQc2:Low-emitting materials
posted by  Kathleen Gaffney  on 

Are duct sealants and wallpaper required to have emissions testing documentation with TVOC in addition to VOC contents found in the MSDS?

1
Fri Jun 5, 2020, 6:14 pm