Forum quick links
PV for EAc1 Energy Prequisites C+S/NC LEED v3 2009
NC-2009 EAp2:Minimum Energy Performanceposted by Susan Di Giulio on
Using PV for EAp2 (C+S/NC): Can we demonstrate compliance with the energy prerequisites using the project's renewable energy, or does it need to show 4 EAc1 points using energy efficiency alone?
Wood donation tracking
NC-v4 MRp2:Construction and demolition waste management planningposted by Jacinta Lang on
Hi All,
Apartments in university dormitory
NC-v4 EAp2:Minimum energy performanceposted by Cory Duggin on
Is it correct that an apartment in a dormitory should be documented as a residential dwelling unit in the MEPC on the multifamily tab but the dorm rooms should not as they are not complete dwelling
Student trying to calculate FTE's for Senior Design
posted by Lauren Townley on
Good afternoon, I am trying to calculate some savings for various fixtures and I am having trouble coming up with the minutes usage for my calculations. Here is what I have so far.
RE: EPD's For Assemblies or Whole Products (Mortars and Grouts)
NC-v4 MRc2:Building product disclosure and optimization - environmental product declarationsposted by John Doherty on
I am reviewing the benefit of generating EPDs for our pre-blended mortar and grout products and the challenge is the guidance via the new rules of LEED v4.
LEED Project boundaries with Shared Elevator/Restroom Cores/Lobby
CI-v4 MPR2:Must use reasonable LEED boundariesposted by Brian Kish on
I am working in a 9 story, existing building in downtown Pittsburgh, PA. Our client has 3.5 floors of area that is part of our project scope of work. The lobby, restrooms, elevators/sta
Project in a resort attached to casino that allows smoking
CI-v4 EQp2:Environmental tobacco smoke controlposted by Anna Kaelin on
I have a client planning a complete fit-out of one of their retail spaces. The project is located in a resort in Las Vegas, which is attached to a Casino that allows smoking.
Mechanical Equipment that serves our LEED project is located on the roof of a different (non-certified) Building
Healthcare-v4 MPR2:Must use reasonable LEED boundariesposted by Gordon Ingerson on
I am working on a BD+C: Healthcare project that is a new building addition adjacent to an existing hospital.
Lab Exhaust Fan Power - ASHRAE 2013
NC-v4 EAc2:Optimize energy performanceposted by Pooja Sannamani on
Hi,
Cabinet Unit Heaters and Propeller Unit Heater
Schools-NC-v4.1 EQp1:Minimum Indoor Air Quality Performanceposted by Dan Cottrill on
Hello - are cabinet unit heaters and propeller unit heaters required to comply with IEQp1 / ASHRAE 62.1 section 5, systems and equipment?