In our case, the wooden walls are produced by a German manufacturer who is COC-certified.

Greetings, There are some more details about this issue, for which I'd appreciate very much some clarifications. Regarding the modeling approach for garage ventilation in the Baseline, it should fo

Dear All, I have difficulties to define window groups for internal shading control when carrying out Option 1 (sDA) daylight simulation for a core and shell office building.

Greetings, The question is related to modeling rooms/zones which are to be assigned to System 9. In the Proposed, these rooms/zones are having supply, return and sometime room exhaust ventilation.

Greetings, The project we are modeling at the moment is supposed to have exterior lighting for the facades, some parking lots and some walkways. The exact LPD however is still to be calculated and

Greetings, In our project (registered as per LEEDv2009) there are several garage ventilations. According to ASHRAE 62.1-2007, the garage exhaust rate is to be sized to 0.75 cfm/ sq.ft.

Greetings, The project we are modeling follows LEDD v3 - 2007 (System 7) and the heating source is purchased heat. There are two question related to this issue. 1.

Greetings, Could you please provide some advice to the following case (the building belongs to System 7): 1.

Greetings, The project we are modeling is a huge one - a little more than 900 000 sq ft and it is not C&S.

The new calculator (v2009v4_Minimum IAQ Performance Calculator_v03) from the Resources tab, does not count the ‘Zone Outdoor Airflow’ (column N) and it shows 0,00 no matter what system and values w