Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

Qualifying energy use

NC-v4 EAc7:Green power and carbon offsets
posted by  Francesco Passerini  on 

At p. 455 I read: “Exclude any site-generated electricity (e.g.

3
Thu Sep 18, 2014, 3:41 pm

Status of covered outside space and Energy Modeling

NC-2009 EAc1:Optimize Energy Performance
posted by  Amanda Johnson  on 

Hello, We are working on a mixed use project with a glass-covered outdoors space that fills the void between 3 different buildings (hotels, conference and restaurant).

4
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Thu Sep 18, 2014, 3:31 pm

Eliminating Multiple Responses From One Person - Survey Changes

EBOM-2009 SSc4:Alternative Commuting Transportation
posted by  Kevin Kelly  on 

I have been certifying many large office buildings in NYC and would like some help on the below: I provide a survey to building occupants in multiple forms (e.g.

2
Project Director
WSP USA
LEEDuser Basic Member
381 thumbs up
Thu Sep 18, 2014, 2:49 pm

Partially Irrigated Site / Form

NC-2009 WEc1:Water Efficient Landscaping
posted by  Johanna Phelps  on 

I have a partially irrigated site. Under irrigation types there are three choices, drip, sprinkler and other. What should I put for the non-irrigated areas?

2
Wed Sep 17, 2014, 11:15 pm

FF&E

NC-2009 IEQc4.4:Low-Emitting Materials—Composite Wood and Agrifiber Products
posted by  Adrienn Gelesz  on 

Hi, If I include FF&E in the MR calculations, is this also necessary for this credit? Thanks, Adrienn

6
Wed Sep 17, 2014, 8:07 pm

treating stored rainwater?

NC-2009 SSc6.2:Stormwater Design—Quality Control
posted by  Carrie Laurendine  on 

we have a tank in our project that will store rainwater.

4
Building Enclosure Consultant
BPL Enclosure
LEEDuser Basic Member
58 thumbs up
Wed Sep 17, 2014, 4:52 pm

Low emitting materials adhesives and sealants

Schools-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Stephanie Santiago  on 

I have a question about which VOC limit to use on the chart...

3
Wed Sep 17, 2014, 3:11 pm

Baseline system(s) for mixed use building?

NC-2009 EAp2:Minimum Energy Performance
posted by  Erin Holdenried  on 

We have a project that consists of 1 level of retail, 7 levels of above grade parking, 8 levels of commercial office space, and 16 levels of residential (apartment) space.

2
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Wed Sep 17, 2014, 1:54 pm
13
Tue Sep 16, 2014, 9:49 pm

IEQc5 - Average Pascal Calculation

CS-2009 IEQc5:Indoor Chemical and Pollutant Source Control
posted by  Heather Park  on 

Hi everyone, our engineer has a question about calculating the average pascal. His exact questions is: "...but I do not know what they are looking for with the “Average Pressure Differential”.

2
Mechanical Engineer
Integral Group
LEEDuser Expert
342 thumbs up
Tue Sep 16, 2014, 4:49 pm