Tristan Roberts Representative Vermont House of Representatives LEEDuser Expert 11477 thumbs up November 27, 2015- 12:42 pm Pedro, this sounds like a question for our EAp2 forum, and you may find some useful guidance there as well. Log in or register to post comments ...

Hi all,

We are embarking on our office's first LEED Commercial Interiors project. The existing envelope received 2009 v3 LEED Gold for Core and Shell in 2014. Will it be acceptable for us...

Hi,
We have a school expansion project to introduce a new middle school on a site which already has an existing primary and secondary school present. We wish to establish the most suitable...

Hi all,
we are working on a refurbishment project located outside US and we are looking for applying LEED v4.
The four stories building consist in a mix use as follows:
• Museum...

My team has just taken on a renovation/fit-out project. The building in which the project will take place is brand new, and is about 4 weeks from construction completion. It was pursuing LEED...

How do I classify a Building already under construction; all Site Utilities in place, 1st Fl. slab in place and 1st Fl Ext. walls already up, in other words a 1st. Fl. Shell is in place.
...

Hi there,

We are working on project (an Ambulatory Care Center) that is primarily out-patient, however the ER is 24 hours and the Pharmacy is 24 hours. There are only 2 in-patient rooms...

as parking garages) as part of a LEED project, see this discussion on the NC-2009 EAp2 forum: http://www.leeduser.com/comment/redirect/59216. Log in or register to post comments ...

Dear All,
We are working on a project located in Italy, which would pursue the LEED certification under a 2009 version and we are wondering about the most appropriate rating system to use...

Hello,

I've tried calling USGBC, who told me to email certinfo@usgbc.org. I did that a little over 2 weeks ago, and have yet to get a response. I'...