Should an area designated for hot desking be included as a regularly occupied area? No single user will spend more than one hour per day at these workstations.

My project features raised green roof beds (6" deep soil) located directly downstream from a tin roof.

Tristan - Nice article and review of the LEED "Feedback Plaque" as some folks are calling it. You asked for our feedback on the plaque itself as well and I have to admit that I'm conflicted.

I am working for a client who has a variable refrigerant HVAC system with a separate fully condition ventilator supplying fresh air.

My client has an office building with one outside air supply fan supplying ventilation air throughout the three story building via ductwork to 92 heat pump units.

As the general contractor on a recently completed LEED project, all of the tickets I've received from the off-site waste separation facility listed the tonnage diverted by item, i.e., concrete, met

We have a project on a large campus which has involved demolition of over a dozen buildings.

Hi, we are working on a LEED NC 2009 project consisting of an office building, where the thermal energy (heating via hot water) is generated and distributed by means of a municipal grid (about 40 m

Under what category would a 1-compnent mounting Polyurethane foam fall and consequently what would be the maximum VOC level allowed?

Is there a reason why the equipment on the proposed can not be autosized?