Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

LEED 2009 CI Preliminary Combined Review

CI-2009 IEQp1:Minimum IAQ Performance
posted by  Aparna Maladkar  on 

Hello, I am new to LEED and need some assistance before issuing for preliminary combined review. I have completed all the required project and pre-requisites forms.

2
Default Avatar
LEEDuser Basic Member
45 thumbs up
Thu Dec 18, 2014, 4:41 pm

signed lease agreement question

CS-2009 EAp2:Minimum Energy Performance
posted by  emily reese moody  on 

Hello, Can you please confirm if the signed lease agreement page needs to include the tenant signature?

2
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Thu Dec 18, 2014, 4:26 pm

VAV Fan control for baseline system 6

NC-2009 EAp2:Minimum Energy Performance
posted by  Panupant Phapant  on 

We have a rough time seeking to reduce supply fan energy during energy simulations.

3
Default Avatar
SCG Cement - Building Materials
LEEDuser Basic Member
13 thumbs up
Thu Dec 18, 2014, 3:02 pm

Submeters to measure AND RECORD energy use

CI-2009 EAc3:Measurement and Verification
posted by  Michael Smithing  on 

In our project the tenant pays a lump sum for thermal energy use, but pays for electricity based on actual consumption. We therefore cannot achieve the 3 points.

2
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Thu Dec 18, 2014, 2:40 am
3
Wed Dec 17, 2014, 8:46 pm

MRc2 Form Version 0.2.3.. undervaluing commingled waste?

NC-2009 MRc2:Construction Waste Management
posted by  Jake Bebee, LEED AP BD+C, ID+C, WELL AP  on 

I've been reviewing credits for project teams for a while now and cannot figure this out to save my life. One of my team members has mistakenly entered a bunch (about 88% by tonnage) of commingled

2
Default Avatar
LEEDuser Expert
472 thumbs up
Wed Dec 17, 2014, 5:12 pm

Strip out plan

CI-2009 MRc2:Construction Waste Management
posted by  Graham Langton  on 

We are tendering out project in 2 phases. 1 contractor will be brought on to provide a strip out (typical demolition services of a CI project).

2
Default Avatar
LEEDuser Expert
472 thumbs up
Wed Dec 17, 2014, 11:13 am

UV Lacquer

NC-2009 IEQc4.2:Low-Emitting Materials—Paints and Coatings
posted by  Susan Coy  on 

Is there any restrictions on using UV Lacquers?

2
Representative
Vermont House of Representatives
LEEDuser Expert
7780 thumbs up
Wed Dec 17, 2014, 4:57 am

selecting the correct rating system in v.2009

General forums
posted by  KIMBERLY KRAFT  on 

Hello LEEDuser community- I need your opinion on the correct v2009 rating system to use for an office project. Here are the stats: -The 6,000 square foot space is in an existing building that has b

5
Wed Dec 17, 2014, 12:53 am

Groundwater to achieve this credit

CS-2009 WEc2:Innovative Wastewater Technologies
posted by  MKK LEED  on 

Hi, I wonder if using groundwater pumped away from the building’s basement or foundation to use in flush-toilets and urinals instead of potable water is a way to achieve Water Efficiency Credit 2,

2
Representative
Vermont House of Representatives
LEEDuser Expert
7780 thumbs up
Tue Dec 16, 2014, 9:07 pm