This question was just answered over on the NC forum for this credit. Eddy Santosa said:You cannot use ECOTECT daylight reports for credit compliance. The reason is that ECOTECT does not have capability to do daylight calculation under "clear-sky" condition as it is required by IEQ c8.1. ECOTECT daylight calculation has only "uniform" and "overcast" sky condition options. However, you can export and do the calculation with RADIANCE engine by using ECOTECT. Log in or register to post comments 3 Vote up! ...

Josh,

Thanks for your insight. It does make sense that the glazing wouldn't need to be contiguous but I had a...

If one is using the prescription method with a combination of sidelighting and top daylighting and the ratio of the skylights to the...

We've got a 5 storey...

Under LEED-NC2.2 SS-C2.0 the square footage definition stated
"The square footage of a building is the total area in square feet of all rooms including corridors, elevators, stairwells and...

Hello,

In reference to Robert Himmler's comment about the difference between...

I am evaluating the feasibility of obtaining LEED certification for a hotel that is already under construction.

It is my understanding that other projects have submitted applications even...

How does the increase in power allowance described in 9.6.2 work?
Firstly, how decorative is decorative. Do pendant fixtures hanging over a reception desk, which while intended as...

Dear all,

I was wondering if ALL of the...

Dear all,
regarding this credit it is required to (Option 2) to treat 50% of wastewater on-site to tertiary standard. In Vietnam we have different standard for wastewater treatment for...