The language seems a little confusing whether the bus stops need to be within 1/4 mile...

Besides the fact that I find this template absolutely confussing I'm totally thrown by the Flow Rate chart. Under lavatories it compares what you've got against the baseline of 0.5 gpm/gpc...

Is not possible to demostrate a water reduction in this credit if the building collects water from rain and reuses it for the toilets? In my case, the gallons per flush of potable water is zero...

LEED asks that the baseline and projected water use be evaluated at 60 and 80psi. How can we account for the fact that the pressure won't be that high?

Th project is a luxury hotel, which...

I am working on a project where the underground parking garage extends further than the building footprint, under the adjoining pavements and road ways. Do these pavements and road ways have to...

The language for LEED 2009 differs from past versions - it seems to indicate that it won't just accept the default...

I am working with a facility to determine if they can meet the prerequisites for LEED...

We are completing a three-story story "vestiário" (shower and locker room) building in Rio de Janeiro, Brazil and have a question relative to EQc3.2. This building is naturally ventilated and to...

We have a former pasture with designated Heritage Trees on our site. I am considering this...

This question was just answered over on the NC forum for this credit. Eddy Santosa said:You cannot use ECOTECT daylight reports for credit compliance. The reason is that ECOTECT does not have capability to do daylight calculation under "clear-sky" condition as it is required by IEQ c8.1. ECOTECT daylight calculation has only "uniform" and "overcast" sky condition options. However, you can export and do the calculation with RADIANCE engine by using ECOTECT. Log in or register to post comments 3 Vote up! ...