Forum quick links
PC 85 Learning Controls
posted by Dirk Kestner on
No local zoning requirements
NC-2009 SSc4.4:Alternative Transportation—Parking Capacityposted by Agnieszka Rylska on
Is there an Alternative Complance Path for projects outside the US with no minimum local zoning requirements?
Insulation between 2 slabs
NC-v4 EQc2:Low emitting materialsposted by Elodie DUMAS on
Hi, We have several interior spaces where insulation is between two concrete slabs.
Electric Vehicles Fueling Stations / Parking Spots
CS-2009 SSc4.3:Alternative Transportation—Low-Emitting and Fuel-Efficient Vehiclesposted by Daniel Brum on
Our project is an office building that is pursuing LEED for CS (2009).
compliant strategies
NC-v4 SSc4:Rainwater managementposted by Emmanuel Pauwels on
We have a project with an underground parking which covers the whole site.
LEED BD&C Healthcare vs. CI?
posted by Patty Lloyd on
I am being asked to review a BD&C 2009 Healthcare scorecard for an interior renovation for a procedure suite within a hospital. Is there an Interiors rating for Healthcare?
G6.5.3.1 -2 Pressure Drop Adjustment by Space
Data-Centers-NC-v4 EAp2:Minimum energy performanceposted by Rajesh Balachander on
Hi Marcus Would like to check. My space has FA system fan, Recirculating Air Fan and also Exhaust air fan. Can I use the table for adjustments.
M&V credit energy model calibration
NC-v4 EAp1:Fundamental commissioning and verificationposted by MKK LEED on
With the removal of the M&V credit under LEED V4.0, is a calibrated energy model still required under Fundamental Commissioning and Verification credit or some other LEED credit?
ANSI A138.1 - 2011 Green Squared
NC-2009 IEQc4.3:Low-Emitting Materials—Flooring Systemsposted by LEED Pro Consultant on
Good day, Im working on a project and I would like to know if it is sufficient if a hard surface flooring system meets the necessary qualifications under ANSI A138.1 - 2011 Green Squared. Thank you
ASHRAE 90.1 PRM Energy Model
CS-2009 EAp2:Minimum Energy Performanceposted by Ciaran McCabe on
Hi, Does anyone know a good step by step guide useful when working on the 90.1 PRM appendix G model ? To make sure all boxes are ticked !