Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

Major renovation of historic landmark building

NC-2009 EAp2:Minimum Energy Performance
posted by  Veronica Reed  on 

Hello I am working on the major renovation of a historic landmark building in part of an area protected as world heritage site by UNESCO, and the building cannot be modified in its envelope since

2
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Thu Mar 16, 2017, 5:06 am

CO2 Sensors

EBOM-2009 IEQc1.2:IAQ Best Management Practices—Outdoor Air Delivery Monitoring
posted by  AshLee Eustace  on 

I'm trying to get an idea of where CO2 sensors would be required on a project. It is an office building with one AHU per floor and one for a fitness center.

6
Default Avatar
ecoPreserve: Building Sustainability
LEEDuser Basic Member
101 thumbs up
Wed Mar 15, 2017, 6:01 pm

Modeling Office Space in an Existing High Rise Building

CI-v4 EAp2:Minimum energy performance
posted by  Annie Argento   on 

We're using eQuest to model a tenant improvement office space, which is about half of one story in a 28 story high rise office building in LA.

2
Wed Mar 15, 2017, 2:06 pm

Dedicated bike lanes

Schools-2009 SSc4.2:Alternative Transportation—Bicycle Storage and Changing Rooms
posted by  Phillip Henning  on 

What is a dedicated bike lane? I have a sidewalk leading to a new elementary school in two different directions. One is approximately 100 feet long from the from the primary access road.

3
Tue Mar 14, 2017, 11:15 pm

overall accuracy, anticipated areas of error susceptibility

NC-2009 EAc5:Measurement and Verification
posted by  Leanne Niu  on 

There is a review comment in my project as follows: It appears that the M&V plan provided does not specify the expected overall accuracy, anticipated areas of error susceptibility, and magnitud

3
Default Avatar
AECOM
LEEDuser Basic Member
0 thumbs up
Tue Mar 14, 2017, 6:28 pm

New materials and resources calculator since 12/01/16

NC-2009 MRc5:Regional Materials
posted by  Guillermo Brunzini  on 

Hello Everybody, Two questions: 1- a project registered in 2012 can use the new materials and resources calculator? 2- What happens with the cutsheets required in previous versions,?

2
Default Avatar
LEED Consultant
The Green Engineer
LEEDuser Basic Member
188 thumbs up
Tue Mar 14, 2017, 3:55 pm
4
President
HJKessler Associates
LEEDuser Basic Member
41 thumbs up
Mon Mar 13, 2017, 10:01 pm

Local voluntary cleanup program - definition

NC-2009 SSc3:Brownfield Redevelopment
posted by  Anna Korinkova  on 

Under Option 1 of the credit, we can pursue EITHER the ASTM E1903-97 Phase II Environmental Site Assessment OR the 'local voluntary cleanup program'.

3
Mon Mar 13, 2017, 4:52 pm

Well for condos !

WELL v1 Building Standard Tip Sheet
posted by  H Agarwal  on 

As the everything starts from top and gradually bottoms down. I wish Well for individual homes could be available .

3
President, LEED AP, WELL AP
Entegra Development & Investment, LLC
LEEDuser Premium Member
43 thumbs up
Mon Mar 13, 2017, 4:33 pm

Which flooring system in project scope must be compliant?

CS-2009 IEQc4.3:Low-Emitting Materials—Flooring Systems
posted by  Alessio Zampaglione  on 

Hi everyone, I’m working on an office building project registered under LEED C&S2009 in which there are different flooring systems: .

6
Mon Mar 13, 2017, 3:00 pm